Reference Guide

Property Description
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change - Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable - Indicates the implementation does not
support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in
the process of transitioning.
DCIM_LCDPanel
Property Description
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance.
When used with the other key properties of this class, this property allows all
instances of this class and its subclasses to be uniquely identified.
DeviceID
An address or other identifying information used to uniquely name the LogicalDevice.
DisplayDataCategory
Identifies the category of data to be displayed on the LCD Panel.
Possible values are:
• 2 = None
• 3 = User Specified
• 4 = Default
• 5 = IPv4 Address
• 6 = IDRAC MAC Address
• 7 = Service Tag
• 8 = System Name
• 9 = IPv6 Address
• 10 = Ambient
• 11 = System Power
DisplayModeUserString
Contains a user configurable string to be displayed on the LCD panel if
DisplayDataCategory has the value 3.
EnabledDefault
An enumerated value indicating an administrator's default or startup configuration
for the Enabled State of an element.
Possible values are:
• 2 = Enabled
154