Dell OpenManage Client Instrumentation Version 8.2.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2013 Dell Inc. All Rights Reserved.
Contents 1 Introduction..................................................................................................................................7 Introduction to the SNMP Reference Guide.............................................................................................................7 OMCI Management Instrumentation Base........................................................................................................ 7 SNMP Basic Terminology.........................................
System State Cooling Device Status Combined...............................................................................................20 System State Cooling Device Status Details....................................................................................................21 System State Temperature State Details.........................................................................................................21 System State Temperature Status Combined........................................
System BIOS Characteristics Ext2................................................................................................................... 33 6 Operating System Group..........................................................................................................35 Operating System Table..........................................................................................................................................35 Operating System Table Entry....................................
Processor Device Table................................................................................................................................... 63 Memory Device Table...................................................................................................................................... 70 PCI Device Table.............................................................................................................................................. 75 Network Device Table................
1 Introduction This reference guide provides information about the Simple Network Management Protocol (SNMP) Management Information Base (MIB) which is applicable to Dell OpenManage Client Instrumentation (OMCI). Introduction to the SNMP Reference Guide This reference guide provides a formatted version of the following MIB that are released with the current version of OMCI. Sections in this guide follow MIB groups and provide explanations and definitions for the terms used to define MIB objects.
Table 1. OMCI MIB Sections in This Guide Section Topics MIB Group Numbers 2 Instrumentation MIB Version Group — Defines version numbers of the Instrumentation MIB. 1 3 Systems Management Software Group — Defines information about the systems management software and the supported systems management standards. 100 4 System State Group — Defines status, state, and redundancy for a system and its components.
• The Dell OpenManage Client Instrumentation Installation Guide provides information on installing Client Instrumentation. • The Dell OpenManage Client Instrumentation User Guide provides information on installing Client Instrumentation. Accessing Documents From Dell Support Site To access the documents from Dell Support site: 1. Go to dell.com/support/manuals. 2. In the Tell us about your Dell system section, under No, select Choose from a list of all Dell products and click Continue. 3.
2 OMCI MIB Version Group The OMCI Management Information Base (MIB) Version Group defines the attributes that identify the version of the OMCI MIB supported by the systems management software. The mIBMajorVersionNumber, mIBMinorVersionNumber, and mIBMaintenanceVersionNumber attributes are scalar objects, that are not related to other MIB objects and are not placed in a table. Name mIBVersionGroup Object ID .1.3.6.1.4.1.674.10892.1.
Description This attribute defines the maintenance version number for the version of the MIB supported by the systems management software. For example, if the MIB version is 1.2.3, the maintenance version number is 3.
Systems Management Software Group 3 The Systems Management Software Group allows users to see information about the standards and software that are supported by the agent of a particular managed computer. The Systems Management Software Group classifies each computer according to the systems management standard that the agent supports. Name systemManagementSoftwareGroup Object ID .1.3.6.1.4.1.674.10892.1.100 Systems Management Software The following objects describe the fields for client systems.
Description This attribute defines the build number of the instrumentation component of the systems management software. Syntax DellUnsigned16BitRange Access Read only Systems Management Software Description Name Name systemManagementSoftwareDescriptionName Object ID .1.3.6.1.4.1.674.10892.1.100.4 Description This attribute defines the description of the systems management software.
Access Read only Systems Management Software SNMP Agent Feature Flags Name systemManagementSoftwareSNMPAgentFeatur eFlags Object ID .1.3.6.1.4.1.674.10892.1.100.12 Description This attribute defines the features of the SNMP agent software provided by the operating system. If the value is zero, none of the features are enabled.This attribute is a bit field, so the value returned may be a combination of the bit masks defined in SMSSNMPAgentFeatureFlags.
System State Group 4 The Management Information Base (MIB) variables presented in this section enable you to track various attributes that describe the state of the critical components supported by your system. Components monitored under the System State Group include power supplies, AC power cords, AC power switches, cooling devices, temperature, fan, amperage, and voltage probes. Name systemStateGroup Object ID .1.3.6.1.4.1.674.10892.1.
• SystemStateChassisIntrusionStatusDetails System State Table Name systemStateTable Object ID .1.3.6.1.4.1.674.10892.1.200.10 Description This object defines the System State Table. Syntax SEQUENCE OF SystemStateTableEntry Access Not accessible System State Table Entry Name systemStateTableEntry Object ID .1.3.6.1.4.1.674.10892.1.200.10.1 Description This object defines the System State Table Entry.
System State Chassis State Name systemStateChassisState Object ID .1.3.6.1.4.1.674.10892.1.200.10.1.3 Description This attribute defines the state settings of the chassis. Syntax INTEGER {unknown(1), enabled(2), notReady(4), enabledAndNotReady(6) } Access Read only System State Chassis Status Name systemStateChassisStatus Object ID .1.3.6.1.4.1.674.10892.1.200.10.1.4 Description This attribute defines the status of the chassis.
Description This attribute defines the combined status of all voltage probes of this chassis. Syntax INTEGER {other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only System State Voltage Status Details Name systemStateVoltageStatusDetails Object ID .1.3.6.1.4.1.674.10892.1.200.10.1.13 Description This attribute lists the status of each voltage probe of the chassis.
ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only System State Cooling Device Status Details Name systemStateCoolingDeviceStatusDetails Object ID .1.3.6.1.4.1.674.10892.1.200.10.1.22 Description This attribute lists the status of each cooling device of the chassis. The results are returned as a binary octet string where each byte of the octet string represents the status of a cooling device. The first byte returned represents the status of the first cooling device, and so on.
Access Read only System State Temperature Status Details Name systemStateTemperatureStatusDetails Object ID .1.3.6.1.4.1.674.10892.1.200.10.1.25 Description This attribute lists the status of each temperature probe of the chassis. The results are returned as a binary octet string where each byte of the octet string represents the status of a temperature probe. The first byte returned represents the status of the first temperature probe, and so on.
System State Memory Device Status Details Name systemStateMemoryDeviceStatusDetails Object ID .1.3.6.1.4.1.674.10892.1.200.10.1.28 Description This attribute lists the status of each memory device of the chassis. The results are returned as a binary octet string where each byte of the octet string represents the status of a memory device. The first byte returned represents the status of the first memory device, and so on. The bytes have the same definition type as DellStatus.
System State Chassis Intrusion Status Details Name systemStateChassisIntrusionStatusDetail s Object ID .1.3.6.1.4.1.674.10892.1.200.10.1.31 Description This attribute lists the status of each intrusion detection device of the chassis. The results are returned as a binary octet string where each byte of the octet string represents the status of an intrusion detection device. The first byte returned represents the status of the first intrusion detection device, and so on.
Chassis Information Group 5 The Chassis Information Group provides information about the type or types of chassis, and the settings for devices on each chassis. Information is also available about the current date and time displayed on the chassis, intrusion warnings, systems management basic input/output system (SMBIOS), and so on. Name chassisInformationGroup Object ID .1.3.6.1.4.1.674.10892.1.
Chassis Status Name chassisStatus Object ID .1.3.6.1.4.1.674.10892.1.300.10.1.4 Description This attribute defines the status of the chassis. Syntax INTEGER {other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only Chassis Type Name chassisType Object ID .1.3.6.1.4.1.674.10892.1.300.10.1.6 Description This attribute defines the chassis type of the chassis.
Chassis Name Name chassisName Object ID .1.3.6.1.4.1.674.10892.1.300.10.1.7 Description This attribute defines the user-assigned name of the chassis. Syntax DellString Access Read only Chassis Manufacturer Name Name chassisManufacturerName Object ID .1.3.6.1.4.1.674.10892.1.300.10.1.8 Description This attribute defines the name of the manufacturer of the chassis. Syntax DellString Access Read only Chassis Asset Tag Name Name chassisAssetTagName Object ID .1.3.6.1.4.1.674.10892.1.300.
Syntax DellUnsigned8BitRange Access Read only Chassis ID Extension Name chassisIDExtension Object ID .1.3.6.1.4.1.674.10892.1.300.10.1.13 Description This attribute defines the system ID extension. Syntax DellUnsigned16BitRange Access Read only Chassis System Class Name chassisSystemClass Object ID .1.3.6.1.4.1.674.10892.1.300.10.1.14 Description This attribute defines the system class.
MM is the monthdd is the dayhh are the hours mm are the minutesss are the secondsuuuuuu is the number of microseconds +fff or -fff is the offset from UTC in minutes Syntax DellDateName Access Read only Chassis System Date Name Name chassisSystemDateName Object ID .1.3.6.1.4.1.674.10892.1.300.10.1.17 Description This attribute defines the current time of the system. Dates are defined in the ASCII format: yyyyMMddhhmmss.uuuuuu+fff or yyyyMMddhhmmss.
Access Read only System BIOS Index Name systemBIOSIndex Object ID .1.3.6.1.4.1.674.10892.1.300.50.1.2 Description This attribute defines the index (one-based) of the system BIOS. Syntax DellObjectRange Access Read only System BIOS State Capabilities Name systemBIOSStateCapabilities Object ID .1.3.6.1.4.1.674.10892.1.300.50.1.3 Description This attribute defines the state capabilities of the system BIOS.
Syntax DellUnsigned32BitRange Access Read only System BIOS Release Date Name Name systemBIOSReleaseDateName Object ID .1.3.6.1.4.1.674.10892.1.300.50.1.7 Description This attribute defines the release date name of the system BIOS. Syntax DellDateName Access Read only System BIOS Version Name Name systemBIOSVersionName Object ID .1.3.6.1.4.1.674.10892.1.300.50.1.8 Description This attribute defines the version name of the system BIOS.
System BIOS Manufacturer Name Name systemBIOSManufacturerName Object ID .1.3.6.1.4.1.674.10892.1.300.50.1.11 Description This attribute defines the name of the manufacturer of the system BIOS. Syntax DellString Access Read only System BIOS Characteristics Name systemBIOSCharacteristics Object ID .1.3.6.1.4.1.674.10892.1.300.50.1.12 Description This attribute defines characteristics of the system BIOS. This attribute is a bit field where a bit has the meaning defined below when set to 1 (one).
• • • • • • • • • • • • • • • • • Bit 22 — Int 13h - 5.25 in / 360 KB Floppy Services are supported Bit 23 — Int 13h - 5.25 in /1.2MB Floppy Services are supported Bit 24 — Int 13h - 3.5 in / 720 KB Floppy Services are supported Bit 25 Int 13h - 3.5 in / 2.
• • • • Bit 0 — BIOS Boot Specification supported Bit 1— Function key-initiated Network Service boot supported Bit 2 — Targeted Content Distribution supported Bit 3-7 — Reserved Syntax DellUnsigned8BitRange Access Read only 34
6 Operating System Group The Operating System Group provides status and identifying information about a system’s operating system. Identifying information includes the name, version, service pack, and patch level of the installed operating system. Name operatingSystemGroup Object ID .1.3.6.1.4.1.674.10892.1.
Operating System Status Name operatingSystemStatus Object ID .1.3.6.1.4.1.674.10892.1.400.10.1.4 Description This attribute defines the status of the operating system. Syntax INTEGER {other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only Operating System Is Primary Name operatingSystemIsPrimary Object ID .1.3.6.1.4.1.674.10892.1.400.10.1.5 Description This attribute defines if this operating system is the primary operating system or not.
Operating System Memory Table Name operatingSystemMemoryTable Object ID .1.3.6.1.4.1.674.10892.1.400.20 Description This object defines the Operating System Memory Table. Syntax SEQUENCE OF OperatingSystemMemoryTableEntry Access Not accessible Operating System Memory Table Entry Name operatingSystemMemoryTableEntry Object ID .1.3.6.1.4.1.674.10892.1.400.20.1 Description This object defines the Operating System Memory Table Entry.
Operating System Memory Status Name operatingSystemMemoryStatus Object ID .1.3.6.1.4.1.674.10892.1.400.20.1.4 Description This attribute defines the status of the operating system memory. Syntax INTEGER {other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only Operating System Memory Total Physical Size Name operatingSystemMemoryTotalPhysicalSize Object ID .1.3.6.1.4.1.674.10892.1.400.20.1.
Operating System Memory Available Page File Size Name operatingSystemMemoryAvailablePageFileSize Object ID .1.3.6.1.4.1.674.10892.1.400.20.1.8 Description This attribute defines the available page file memory for the operating system memory in kilo bytes.
7 Remote Flash BIOS Group The Remote Flash Basic Input/Output System (BIOS) Table defines the variables used to remotely update the BIOS in a system. The variables also define the capabilities of BIOS updates on the system. Name remoteFlashBIOSGroup Object ID .1.3.6.1.4.1.674.10892.1.900 Remote Flash BIOS Group Table The Remote Flash BIOS Group defines objects in the Remote Flash BIOS MIB table. Remote Flash BIOS Table Name remoteFlashBIOSTable Object ID .1.3.6.1.4.1.674.10892.1.900.
Remote Flash BIOS Index Name remoteFlashBIOSIndex Object ID .1.3.6.1.4.1.674.10892.1.900.10.1.2 Description This attribute defines the index (one-based) of the remote flash BIOS function. Syntax DellObjectRange Access Read only Remote Flash BIOS Status Name remoteFlashBIOSStatus Object ID .1.3.6.1.4.1.674.10892.1.900.10.1.5 Description This attribute defines the status of the remote flash BIOS function.
Remote Flash BIOS Minimum Contiguous Memory Name remoteFlashBIOSMinimumContiguousMemory Object ID .1.3.6.1.4.1.674.10892.1.900.10.1.8 Description This attribute defines the minimum size in KB of contiguous memory required for the remote flash BIOS function.
8 Port Group The Port Group provides information about the different types of ports that may be present in your system. This management information base (MIB) group also provides information about the capabilities, states, and settings that are possible for each port. Name portGroup Object ID .1.3.6.1.4.1.674.10892.1.
Pointing Port Chassis Index Name pointingPortIndex Object ID .1.3.6.1.4.1.674.10892.1.1000.10.1.2 Description This attribute defines the index (one-based) of the pointing port. Syntax DellObjectRange Access Read only Pointing Port Index Name pointingPortIndex Object ID .1.3.6.1.4.1.674.10892.1.1000.10.1.2 Description This attribute defines the index (one-based) of the pointing port.
Pointing Port BIOS Connector Type Name pointingPortBIOSConnectorType Object ID .1.3.6.1.4.1.674.10892.1.1000.10.1.9 Description This attribute defines the BIOS connector type of the pointing port.
Syntax SEQUENCE OF KeyboardPortTableEntry Access Not accessible Keyboard Port Table Entry Name processorPortTable Object ID .1.3.6.1.4.1.674.10892.1.1000.30 Description This object defines the Processor Port Table. Syntax SEQUENCE OF ProcessorPortTableEntry Access Not accessible Keyboard Port Chassis Index Name keyboardPortchassisIndex Object ID .1.3.6.1.4.1.674.10892.1.1000.20.1.1 Description This attribute defines the index (one-based) of the associated chassis.
Keyboard Port Connector Type Name keyboardPortConnectorType Object ID .1.3.6.1.4.1.674.10892.1.1000.20.1.7 Description This attribute defines the connector type of the keyboard port.
portConnectorTypeIsHPHIL(19), portConnectorTypeIsAccessBussUSB(20), portConnectorTypeISSASCSI(21), portConnectorTypeIsCirdin8Male(22), portConnectorTypeIsCirdin8Female(23), portConnectorTypeIsIDE(24), portConnectorTypeIsFloppy(25), portConnectorTypeIsDIN9Pin(26), portConnectorTypeIsDIN25Pin(27), portConnectorTypeIsDIN50Pin(28), portConnectorTypeIsDIN68Pin(29), portConnectorTypeIsCDROMLineOut(30), portConnectorTypeIsMiniCentronics14(31) , portConnectorTypeIsMiniCentronics26(32) , portConnectorTypeIsMiniJack(
Access Read only Processor Port Index Name processorPortIndex Object ID .1.3.6.1.4.1.674.10892.1.1000.30.1.2 Description This attribute defines the index (one-based) of the processor port. Syntax DellObjectRange Access Read only Processor Port Status Name processorPortStatus Object ID .1.3.6.1.4.1.674.10892.1.1000.30.1.5 Description This attribute defines the status of the processor port.
Syntax DellString Access Read only Processor Port BIOS Connector Type Name processorPortBIOSConnectorType Object ID .1.3.6.1.4.1.674.10892.1.1000.30.1.9 Description This attribute defines the BIOS connector type of the processor port.
Memory Device Port Table Entry Name memoryDevicePortTableEntry Object ID .1.3.6.1.4.1.674.10892.1.1000.40.1 Description This object defines the Memory Device Port Table Entry. Syntax MemoryDevicePortTableEntry Access Not accessible Memory Device Port Chassis Index Name memoryDevicePortchassisIndex Object ID .1.3.6.1.4.1.674.10892.1.1000.40.1.1 Description This attribute defines the index (one-based) of the associated chassis.
Description This attribute defines the connector type of the memory device port.
portConnectorTypeISSASCSI(21), portConnectorTypeIsCirdin8Male(22), portConnectorTypeIsCirdin8Female(23), portConnectorTypeIsIDE(24), portConnectorTypeIsFloppy(25), portConnectorTypeIsDIN9Pin(26), portConnectorTypeIsDIN25Pin(27), portConnectorTypeIsDIN50Pin(28), portConnectorTypeIsDIN68Pin(29), portConnectorTypeIsCDROMLineOut(30), portConnectorTypeIsMiniCentronics14(31) , portConnectorTypeIsMiniCentronics26(32) , portConnectorTypeIsMiniJack(33), portConnectorTypeIsBNC(34), portConnectorTypeIs1394(35), portCo
Parallel Port Index Name processorPortIndex Object ID .1.3.6.1.4.1.674.10892.1.1000.30.1.2 Description This attribute defines the index (one-based) of the processor port. Syntax DellObjectRange Access Read only Parallel Port Status Name parallelPortStatus Object ID .1.3.6.1.4.1.674.10892.1.1000.70.1.5 Description This attribute defines the status of the parallel port.
Syntax DellString Access Read only Parallel Port Connector Pin Out Name parallelPortConnectorPinOut Object ID .1.3.6.1.4.1.674.10892.1.1000.70.1.9 Description This attribute defines the parallel port pin out.
Serial Port Table Name serialPortTable Object ID .1.3.6.1.4.1.674.10892.1.1000.80 Description This object defines the Serial Port Table. Syntax SEQUENCE OF SerialPortTableEntry Access Not accessible Serial Port Table Entry Name serialPortTableEntry Object ID .1.3.6.1.4.1.674.10892.1.1000.80.1 Description This object defines the Serial Port Table Entry. Syntax SerialPortTableEntry Access Not accessible Serial Port Chassis Index Name serialPortchassisIndex Object ID .1.3.6.1.4.1.674.
critical(5), nonRecoverable(6) } Access Read only Serial Port Connector Type Name serialPortConnectorType Object ID .1.3.6.1.4.1.674.10892.1.1000.80.1.7 Description This attribute defines the connector type of the serial port.
Description This attribute defines the mode capabilities of the serial port. Syntax INTEGER {other(1), unknown(2), xtorATCapable(4), c16450Capable(8), c16550Capable(16), c16550aCapable(32), c8251Capable(64), c8251FIFOCapable(128) } Access Read only Serial Port Base I/O Address Name serialPortBaseIOAddress Object ID .1.3.6.1.4.1.674.10892.1.1000.80.1.11 Description This attribute defines the base I/O address of the serial port.
USB Port Chassis Index Name uSBPortchassisIndex Object ID .1.3.6.1.4.1.674.10892.1.1000.90.1.1 Description This attribute defines the index (one-based) of the associated chassis. Syntax DellObjectRange Access Read only USB Port Index Name uSBPortIndex Object ID .1.3.6.1.4.1.674.10892.1.1000.90.1.2 Description This attribute defines the index (one-based) of the USB port. Synta DellObjectRange Access Read only USB Port Status Name uSBPortStatus Object ID .1.3.6.1.4.1.674.10892.1.1000.
Syntax DellString Access Read only USB Port BIOS Connector Type Name uSBPortBIOSConnectorType Object ID .1.3.6.1.4.1.674.10892.1.1000.90.1.9 Description This attribute defines the BIOS connector type of the USB port.
9 Device Group The Device Group provides information about different types of pointing, keyboard, processor, cache, memory, and peripheral component interconnect (PCI) devices. Variables in this group cover information about type, settings, configuration, manufacturer, address or location, and if applicable, the speed of the device. Name deviceGroup Object ID .1.3.6.1.4.1.674.10892.1.
Syntax DellObjectRange Access Read only Processor Device Index Name processorDeviceIndex Object ID .1.3.6.1.4.1.674.10892.1.1100.30.1.2 Description This attribute defines the index (one-based) of the processor. Syntax DellObjectRange Access Read only Processor Device Status Name processorDeviceStatus Object ID .1.3.6.1.4.1.674.10892.1.1100.30.1.5 Description This attribute defines the status of the processor.
Processor Device Manufacturer Name Name processorDeviceManufacturerName Object ID .1.3.6.1.4.1.674.10892.1.1100.30.1.8 Description This attribute defines the name of the manufacturer of the processor device. Syntax DellString Access Read only Processor Device Status State Name processorDeviceStatusState Object ID .1.3.6.1.4.1.674.10892.1.1100.30.1.9 Description This attribute defines the status state of the processor.
deviceFamilyIsIntelItanium2(24), deviceFamilyIsK5(25), deviceFamilyIsK6(26), deviceFamilyIsK6-2(27), deviceFamilyIsK6-3(28), deviceFamilyIsAMDAthlon(29), deviceFamilyIsAMD2900(30), deviceFamilyIsK6-2Plus(31), deviceFamilyIsPowerPC(32), deviceFamilyIsPowerPC601(33), deviceFamilyIsPowerPC603(34), deviceFamilyIsPowerPC603Plus(35), deviceFamilyIsPowerPC604(36), deviceFamilyIsPowerPC620(37), deviceFamilyIsPowerPCx704(38),deviceFam ilyIsPowerPC750(39), deviceFamilyIsIntelCoreDuo(40), deviceFamilyIsIntelCoreDuoMob
deviceFamilyIsEfficeonTM8000(122), deviceFamilyIsWeitek(128), deviceFamilyIsIntelCeleronM(130), deviceFamilyIsAMDAthlon64(131), deviceFamilyIsAMDOpteron(132), deviceFamilyIsAMDSempron(133), deviceFamilyIsAMDTurion64Mobile(134), deviceFamilyIsDualCoreAMDOpteron(135), deviceFamilyIsAMDAthlon64X2DualCore(136 ), deviceFamilyIsAMDTurion64X2Mobile(137), deviceFamilyIsQuadCoreAMDOpteron(138), deviceFamilyIsThirdGenerationAMDOptero n(139), deviceFamilyIsAMDPhenomFXQuadCore(140), deviceFamilyIsAMDPhenomX4QuadCore(14
deviceFamilyIsAMDAthlonXP(182), deviceFamilyIsAMDAthlonMP(183), deviceFamilyIsAMDDuron(184), deviceFamilyIsIntelPentiumM(185), deviceFamilyIsIntelCeleronD(186), deviceFamilyIsIntelPentiumD(187), deviceFamilyIsIntelPentiumExtreme(188), deviceFamilyIsIntelCoreSolo(189), deviceFamilyIsIntelCore2(190), deviceFamilyIsIntelCore2Duo(191), deviceFamilyIsIntelCore2Solo(192), deviceFamilyIsIntelCore2Extreme(193), deviceFamilyIsIntelCore2Quad(194), deviceFamilyIsIntelCore2ExtremeMobile(1 95), deviceFamilyIsIntelCore2D
deviceFamilyIsi860(250), deviceFamilyIsi960(251) } Access Read only Processor Device Maximum Speed Name processorDeviceMaximumSpeed Object ID .1.3.6.1.4.1.674.10892.1.1100.30.1.11 Description This attribute defines the maximum speed of the processor in MHz. Zero indicates the maximum speed is unknown. Syntax DellUnsigned32BitRange Access Read only Processor Device Current Speed Name processorDeviceCurrentSpeed Object ID .1.3.6.1.4.1.674.10892.1.1100.30.1.
Processor Device Stepping Name Name processorDeviceSteppingName Object ID .1.3.6.1.4.1.674.10892.1.1100.30.1.25 Description This attribute defines the stepping of the processor device. Syntax DellString Access Read only Memory Device Table Name memoryDeviceTable Object ID .1.3.6.1.4.1.674.10892.1.1100.50 Description This object defines the Memory Device Table.
nonRecoverable(6) } Access Read only Memory Device Index Name memoryDeviceIndex Object ID .1.3.6.1.4.1.674.10892.1.1100.50.1.2 Description This attribute defines the index (one-based) of the memory device. Syntax DellObjectRange Access Read only Memory Device Type Name memoryDeviceType Object ID .1.3.6.1.4.1.674.10892.1.1100.50.1.7 Description This attribute defines the type of the memory device.
Memory Device Type Details Name memoryDeviceTypeDetails Object ID .1.3.6.1.4.1.674.10892.1.1100.50.1.11 Description This attribute defines the detailed type of the memory device.
Description This attribute defines if the memory device is a part of a set. Zero indicates it is not part of a set and 2,147,483,647 indicates it is unknown if it is a part of a set. Syntax DellUnsigned32BitRange Access Read only Memory Device Size Name memoryDeviceSize Object ID .1.3.6.1.4.1.674.10892.1.1100.50.1.14 Description This attribute defines the memory device size in KB. Zero indicates no memory installed and 2,147,483,647 indicates an unknown memory size.
Memory Device Manufacturer Name Name memoryDeviceManufacturerName Object ID .1.3.6.1.4.1.674.10892.1.1100.50.1.21 Description This attribute defines the manufacturer of the memory device. Syntax DellString Access Read only Memory Device Part Number Name Name memoryDevicePartNumberName Object ID .1.3.6.1.4.1.674.10892.1.1100.50.1.22 Description This attribute defines the manufacturer's part number for the memory device.
PCI Device Table Name pCIDeviceTable Object ID .1.3.6.1.4.1.674.10892.1.1100.80 Description This object defines the PCI Device Table. Syntax SEQUENCE OF PCIDeviceTableEntry Access Not accessible PCI Device Table Entry Name pCIDeviceTableEntry Object ID .1.3.6.1.4.1.674.10892.1.1100.80.1 Description This object defines the PCI Device Table Entry. Syntax PCIDeviceTableEntry Access Not accessible PCI Device Chassis Index Name pCIDevicechassisIndex Object ID .1.3.6.1.4.1.674.10892.1.1100.
critical(5), nonRecoverable(6) } Access Read only PCI Device Data Bus Width Name pCIDeviceDataBusWidth Object ID .1.3.6.1.4.1.674.10892.1.1100.80.1.7 Description This attribute defines the width of the data bus of the PCI device. Syntax DellUnsigned32BitRange Access Read only PCI Device Manufacturer Name Name pCIDeviceManufacturerName Object ID .1.3.6.1.4.1.674.10892.1.1100.80.1.8 Description This attribute defines the name of the manufacturer of the PCI device.
Description This object defines the Network Device Table. Syntax SEQUENCE OF NetworkDeviceTableEntry Access Not accessible Network Device Table Entry Name networkDeviceTableEntry Object ID .1.3.6.1.4.1.674.10892.1.1100.90.1 Description This object defines the Network Device Table Entry. Syntax NetworkDeviceTableEntry Access Not accessible Network Device Chassis Index Name networkDeviceChassisIndex Object ID .1.3.6.1.4.1.674.10892.1.1100.90.1.
Network Device Description Name Name networkDeviceDescriptionName Object ID .1.3.6.1.4.1.674.10892.1.1100.90.1.5 Description This attribute defines the description of the network device. Syntax DellString Access Read only Network Device Vendor Name Name networkDeviceVendorName Object ID .1.3.6.1.4.1.674.10892.1.1100.90.1.7 Description This attribute defines the name of the vendor of the network device.
Network Device IP Address Name networkDeviceIPAddress Object ID .1.3.6.1.4.1.674.10892.1.1100.90.1.11 Description This attribute defines the IP address of the network device. Syntax IpAddress Access Read only Network Device Subnet Mask Name networkDeviceIPSubnetMask Object ID .1.3.6.1.4.1.674.10892.1.1100.90.1.12 Description This attribute defines the IP subnet mask for the IP address currently assigned to the network device.
Access Read only Network Device Permanent MAC Address Name networkDevicePermanentMACAddress Object ID .1.3.6.1.4.1.674.10892.1.1100.90.1.16 Description This attribute defines the permanent MAC address of the network device.
10 Slot Group The Slot Group provides information about the types of slots that your system supports. This management information base (MIB) group also provides information about the voltages, capabilities, states, and settings that are possible for these slots. Name slotGroup Object ID .1.3.6.1.4.1.674.10892.1.1200 System Slot Table Name systemSlotTable Object ID .1.3.6.1.4.1.674.10892.1.1200.10 Description This object defines the systemslot table.
System Slot Index Name systemSlotIndex Object ID .1.3.6.1.4.1.674.10892.1.1200.10.1.2 Description This attribute defines the index (one-based) of the system slot. Syntax DellObjectRange Access Read only System Slot State Capabilities Unique Name systemSlotStateCapabilitiesUnique Object ID .1.3.6.1.4.1.674.10892.1.1200.10.1.3 Description This attribute defines the state capabilities of the system slot.
Syntax INTEGER {systemSlotHotPlugIsUnknown(1), systemSlotHotPlugIsHotPluggable(2), systemSlotHotPlugIsPoweredOn(4), systemSlotHotPlugIsAtAttention(8), systemSlotHotPlugHasPowerFaulted(16), systemSlotHotPlugAdapterIsPresent(32), systemSlotHotPlugAdapterPresentAndPower edOn(36), systemSlotHotPlugPowerButtonPressed(64) , systemSlotProvides5Volts(128), systemSlotProvides3Point3Volts(256), systemSlotIsShared(512), systemSlotSupportsCard16(1024), systemSlotSupportsCardBus(2048), systemSlotSupportsZoomVideo(4096)
Access Read only System Slot Type Name systemSlotType Object ID .1.3.6.1.4.1.674.10892.1.1200.10.1.7 Description This attribute defines the type of the system slot.
Access Read only System Slot Length Name systemSlotLength Object ID .1.3.6.1.4.1.674.10892.1.1200.10.1.9 Description This attribute defines the length of the system slot. Syntax INTEGER {systemSlotLengthIsOther(1), systemSlotLengthIsUnknown(2), systemSlotLengthIsShort(3), systemSlotLengthIsLong(4) } Access Read only System Slot Slot ID Name systemSlotSlotID Object ID .1.3.6.1.4.1.674.10892.1.1200.10.1.10 Description This attribute defines the slot identification number of the system slot.
busWidthIs8bits(3), busWidthIs16bits(4), busWidthIs32bits(5), busWidthIs64bits(6), busWidthIs128bits(7), busWidthIs1xOrx1(8), busWidthIs2xOrx2(9), busWidthIs4xOrx4(10), busWidthIs8xOrx8(11), busWidthIs12xOrx12(12), busWidthIs16xOrx16(13), busWidthIs32xOrx32(14) } Access Read only System Slot Hot-Plug Slot Speed Name systemSlotHotPlugSlotSpeed Object ID .1.3.6.1.4.1.674.10892.1.1200.10.1.13 Description This attribute defines the slot speed in MHz of the hot plug system slot.
11 SNMP Traps OMCI generates events that result in Simple Network Management Protocol (SNMP) traps or operating system event logs. This section describes the traps, also known as alerts, generated by OMCI. OMCI generates events in response to changes in the status of sensors and other monitored parameters. When an event with predefined characteristics occurs on your system, the SNMP subagent sends information about the event, along with trap variables, to the management console.
