Reference Guide

Property Description
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
EnabledState
An integer enumeration that indicates the enabled and disabled states of an
element. It can also indicate the transitions between these requested states.
For example, shutting down (value=4) and starting (value=10) are transient
states between enabled and disabled.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled - Indicates that the element is or could be executing
commands, will process any queued commands, and queues new
requests.
• 3 = Disabled - Indicates that the element will not execute commands
and will drop any new requests.
• 4 = Shutting Down - Indicates that the element is in the process of
going to a Disabled state.
• 5 = Not Applicable - Indicates the element does not support being
enabled or disabled.
• 6 = Enabled but Offline - Indicates that the element may be completing
commands, and will drop any new requests.
• 7 = In Test - Indicates that the element is in a test state.
• 8 = Deferred - Indicates that the element may be completing
commands, but will queue any new requests.
• 9 = Quiesce - Indicates that the element is enabled but in a restricted
mode.
• 10 = Starting - Indicates that the element is in the process of going to
an Enabled state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
Name
The Name property defines the label by which the object is known. When
subclassed, the Name property can be overridden to be a Key property.
RequestedState
An integer enumeration that indicates the last requested or desired state for
the element, irrespective of the mechanism through which it was requested.
The actual state of the element is represented by EnabledState. This property is
provided to compare the last requested and current enabled or disabled states.
Note that when EnabledState is set to 5 ("Not Applicable"), then this property
has no meaning. Refer to the EnabledState property description for
explanations of the values in the RequestedState enumeration.
99