Reference Guide

Property Description
• 4 = Shut Down
• 5 = No Change - Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable - Indicates the implementation does not support
representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the
process of transitioning.
Volatile
Volatile is a property that indicates whether this memory is volatile or not.
DCIM_PCIDevice
Property Description
BusNumber
The bus number where this PCI device resides.
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance.
When used with the other key properties of this class, this property allows all
instances of this class and its subclasses to be uniquely identified.
Description
Provides a textual description of the object.
DeviceID
An address or other identifying information used to uniquely name the LogicalDevice.
DeviceNumber
The device number assigned to this PCI device for this bus.
ElementName
A user-friendly name for the object. This property allows each instance to define a
user-friendly name in addition to its key properties, identity data, and description
information.
NOTE: The Name property of ManagedSystemElement is also defined as a user-
friendly name. But, it is often subclassed to be a Key. It is not reasonable that the
same property can convey both identity and a user-friendly name, without
inconsistencies. Where Name exists and is not a Key (such as for instances of
LogicalDevice), the same information can be present in both the Name and
ElementName properties.
EnabledDefault
An enumerated value indicating an administrator's default or startup configuration for
the Enabled State of an element.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
95