Reference Guide

Property Description
commands or processing requests. This property is set as the result of a method
invocation (such as Start or StopService on CIM_Service), or can be overridden and
defined as WRITEable in a subclass. The method approach is considered superior to a
WRITEable property, because it allows an explicit invocation of the operation and the
return of a result code. If knowledge of the last RequestedState is not supported for the
EnabledLogicalElement, the property is NULL or has the value 12 "Not Applicable".
Possible values are:
• 0 = Unknown - Indicates the last requested state for the element is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Offline - Indicates that the element has been requested to transition to the
Enabled but Offline EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot - Refers to doing a "Shut Down" and then moving to an "Enabled"
state.
• 11 = Reset - Indicates that the element is first "Disabled" and then "Enabled".
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
Security
An enumeration indicating the operational security for the Controller. For example,
information that the Device's external interface is locked out (value=4) or "Boot Bypass"
(value=6) can be described using this property.
Possible values are:
• 1 = Other
• 2 = Unknown
• 3 = None
• 4 = External Interface Locked Out
• 5 = External Interface Enabled
• 6 = Boot Bypass
SerialPortCapabilities
The capabilities of this Serial port.
Possible values are:
• 1 = Other
• 2 = Unknown
• 3 = XT/AT compatible
• 4 = 16450 compatible
• 5 = 16550 compatible
• 6 = 16550A compatible
• 160 = 8251 compatible
• 161 = 8251FIFO compatible
SystemCreationClassName
The CreationClassName of the scoping system.
85