Reference Guide

Property Description

• 10 = Reboot - Refers to doing a "Shut Down" and

then moving to an "Enabled" state.

• 11 = Reset - Indicates that the element is first

"Disabled" and then "Enabled". 12 = Not Applicable

• .. = DMTF Reserved

• 32768..65535 = Vendor Reserved

SystemCreationClassName

The CreationClassName of the scoping System.

SystemName

The Name of the scoping System.

TransitioningToState

Indicates the target state to which the instance is

transitioning. A value other than 5 or 12 identifies the state

to which the element is in the process of transitioning.

Possible values are:

• 0 = Unknown

• 2 = Enabled

• 3 = Disabled

• 4 = Shut Down

• 5 = No Change - Indicates that no transition is in-

progress.

• 6 = Offline

• 7 = Test

• 8 = Defer

• 9 = Quiesce

• 10 = Reboot

• 11 = Reset

• 12 = Not Applicable - Indicates the implementation

does not support representing ongoing transitions

DCIM_Slot

Property Description

ConnectorLayout

Describes the type of packaging normally associated with this type

of connector.

Possible values are:

• 0 = Unknown

• 1 = Other

• 2 = RS232

• 3 = BNC

• 4 = RJ11

• 5 = RJ45

• 6 = DB9

• 7 = Slot

• 8 = SCSI High Density

• 9 = SCSI Low Density

• 10 = Ribbon