Reference Guide

Property Description
• 5 = Not Applicable - Indicates the element does
not support being enabled or disabled.
• 6 = Enabled but Offline - Indicates that the
element may be completing commands, and will
drop any new requests.
• 7 = In Test - Indicates that the element is in a test
state.
• 8 = Deferred - Indicates that the element may be
completing commands, but will queue any new
requests.
• 9 = Quiesce - Indicates that the element is
enabled but in a restricted mode.
• 10 = Starting - Indicates that the element is in the
process of going to an Enabled state. New
requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
For example, shutting down (value=4) and starting
(value=10) are transient states between enabled and
disabled.
InfoFormat
An enumerated integer that describes the format and
interpretation of the AccessInfo property.
Possible values are:
• 1 = Other
• 2 = Host Name
• 3 = IPv4 Address
• 4 = IPv6 Address
• 5 = IPX Address
• 6 = DECnet Address
• 7 = SNA Address
• 8 = Autonomous System Number
• 9 = MPLS Label
• 10 = IPv4 Subnet Address
• 11 = IPv6 Subnet Address
• 12 = IPv4 Address Range
• 13 = IPv6 Address Range
• 100 = Dial String
• 101 = Ethernet Address
• 102 = Token Ring Address
• 103 = ATM Address
• 104 = Frame Relay Address
• 200 = URL 201 = FQDN
• 202 = User FQDN
• 203 = DER ASN1 DN
• 204 = DER ASN1 GN
• 205 = Key ID .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
73