Reference Guide

Property Description
• Lost
• Comm
• Stopped
SubnetMask
The mask for the IPv4 address of this ProtocolEndpoint, if one
is defined.
SystemCreationClassName
The CreationClassName of the scoping System.
SystemName
The Name of the scoping System.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change - Indicates that no transition is in
progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable - Indicates the implementation
does not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the
element is in the process of transitioning.
DCIM_ControllerView
Property Description
BusType
The property represents the type of the PCI bus.
Possible values are:
• 0 - Unknown
• 3 - PCI Bus
• 4 - PCMCIA Bus
• 0x8000 - DMTF Reserved
• 0xffff - Vendor Reserved
ControllerFirmwareVersion
This property represents the firmware version.
Device
The property represents the PCI device.
ElementName
A user-friendly name for the object. This property allows each
instance to define a user-friendly name in addition to its key
properties, identity data, and description information.
60