Reference Guide

Property Description

• 12 = Not Applicable

• .. = DMTF Reserved

• 32768..65535 = Vendor Reserved

SystemCreationClassName

The CreationClassName of the scoping system.

SystemName

The System Name of the scoping system.

TOEEnabledState

An integer enumeration that indicates the enabled and disabled states of the TOE.

Possible values are:

• 0 = Unknown

• 1 = Other

• 2 = Enabled - Indicates that the TOE is enabled and running.

• 3 = Disabled - Indicates that the TOE is disabled.

• 4 = Not Applicable - Indicates the ethernet port does not have TOE capability.

• 5..32767 = DMTF Reserved

• 32768..65535 = Vendor Reserved

TransitioningToState

Indicates the target state to which the instance is transitioning.

Possible values are:

• 0 = Unknown

• 2 = Enabled

• 3 = Disabled

• 4 = Shut Down

• 5 = No Change - Indicates that no transition is in progress.

• 6 = Offline

• 7 = Test

• 8 = Defer

• 9 = Quiesce

• 10 = Reboot

• 11 = Reset

• 12 = Not Applicable - Indicates the implementation does not support

representing ongoing transitions.

A value other than 5 or 12 identifies the state to which the element is in the process of

transitioning.

DCIM_FlatPanel

Property Description

Brightness

The percentage (0-100) of total brightness of the video output

device for system running on battery and AC power. The property

is in the format BatteryBrightness:ACBrightness BuiltIn Defines

whether the video output device is built in. 'True' indicates that

flat panel is directly attached to a portable computer and 'false'

means that flat panel is externally connected through graphics

cable (such as VGA) to a computer.