Reference Guide

Attribute Name Description
• Enable
F2 POST Display
Enables or Disables the F2 key at POST.
Possible values are:
• Disable
• Enable
Fan Control
Override
Controls the speed of the fan. When enabled the fan runs at full speed.
When disabled, the fan controller uses the system environmental data to
set the fan at its optimal speed.
Possible values are:
• Disable
• Enable
Fault-Tolerant
Memory
Configures the system to detect and correct the software errors in a block
of RAM. When enabled, the system detects and corrects the software
errors.
Possible values are:
• Disable
• Enable
Force PXE on Next
Boot
Enables or disables the Force PXE on next boot in BIOS.
Possible values are:
• Disable
• Enable
Front Panel USB
Ports
Enables or Disables the USB ports on the front of the chassis.
Possible values are:
• Disable
• Enable
FX100 BIOS Access
Allows or blocks the remote user to access BIOS Setup via FX100 Portal.
Possible values are:
• On
• Off
General Purpose
Encryption
Enables or disables the general purpose encryption (GPE) on the system.
Possible values are:
• Enable
• Disable
Hard Disk Acoustic
Mode
Sets the Hard Disk Acoustic Mode.
Possible values are:
• Bypass
• Quiet
368