Reference Guide

Attribute Name Description
Battery Slice
Charge
Configuration
Configures the battery slice charging
Possible values are:
• 1 - Standard Charge - Charges the battery over a long period of
time
• 2 - Express Charge - Switches the battery slice to Express Charge
mode using the express charging algorithm
Bitsmart
Enable/Disable the Bitsmart.
Possible values are:
• Disable
• Enable
Bluetooth Devices
Enable/Disable Bluetooth Devices
Possible values are:
• Disable
• Enable
Blink PSU LED 1
Provides the alert for the PSU 1. The Power Supply Unit(PSU) 1 LED starts
to blink when it is enabled.
Possible value:
• Enable
Blink PSU LED 2
Provides the alert for the PSU 2. The Power Supply Unit(PSU) 2 LED starts
to blink when it is enabled.
Possible value:
• Enable
BlockS3
Enables or disables the Block S3 sleep state. If this option is Disabled, the
system BIOS supports OSPM/ACPI S3 (suspend to RAM) operation. This
moves the system authentication into the operating system and bypasses
any Preboot Authentication on resume.
If this option is Enabled, the system BIOS blocks all OSPM/ACPI S3
(suspend to RAM) requests and enforces Preboot Authentication on all
non-S3 resumes.
Possible values are:
• Disable
• Enable
Boot Mode
Enables booting to Unified Extensible Firmware Interface (UEFI) capable
operating systems. This ensures compatibility with operating systems that
do not support UEFI.
Possible values are:
• Bios
• UEFI
Boot Sequence
This defines the boot sequence for the next system boot. Boot Sequence
information can be found under the class Dell_BootDeviceSequence with
OMCI 6.1.
363