Reference Guide

Property Description
• 10 = Starting - Indicates that the element is in the
process of going to an Enabled state. New requests
are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
FrequencyH
This property is a horizontal synchronization signal
frequency in Hz as determined by the display.
FrequencyV
This property is a vertical synchronization signal frequency
in Hz as determined by the display.
HealthState
Indicates the current health of the element. This attribute
expresses the health of this element but not necessarily that
of its subcomponents.
Possible values are:
• 0 = Unknown - The implementation cannot report on
HealthState at this time. DMTF has reserved the
unused portion of the continuum for additional
HealthStates in the future.
• 5 = OK - The element is fully functional and is
operating within normal operational parameters and
without error.
• 10 = Degraded/Warning - The element is in working
order and all functionality is provided. However, the
element is not working to the best of its abilities. For
example, the element may not be operating at
optimal performance or it may be reporting
recoverable errors.
• 15 = Minor failure - All functionality is available but
some may be degraded.
• 20 = Major failure - The element is failing. It is
possible that some or all of the functionality of this
component is degraded or not working.
• 25 = Critical failure - The element is non-functional
and recovery may not be possible.
• 30 = Non-recoverable error - The element has
completely failed, and recovery is not possible. All
functionality provided by this element has been lost.
• .. = DMTF Reserved
IdentifyingDescriptions
An array of free-form strings providing explanations and
details behind the entries in the OtherIdentifyingInfo array.
Note that each entry of this array is related to the entry in
OtherIdentifyingInfo that is located at the same index.
InputAnalog
Input is a analog video signal interface.
InputDigital
Input is a digital video signal interface.
InputDisplayPort
DisplayPort is supported.
InputDVI
DVI is supported.
InputHDMI
HDMI is supported.
InputSource
An enumerated value identifying the current input source.
Writing a new value into this property changes the device's
34