Reference Guide

DCIM_AssociatedPowerManagementService
Property Description
OtherPowerState
A string describing the additional power management state of the
element, used when the PowerState is set to the value 1, "Other".
OtherRequestedPowerState
A string describing the additional power management state of the
element, used when the RequestedPowerState is set to the value
1, "Other".
PowerOnTime
The time when the element will be powered on again, used when
the RequestedPowerState has the value 2, "On", 5, "Power Cycle
(Off - Soft)" or 6, "Power Cycle (Off - Hard)".
PowerState
The current power state of the associated Managed System
Element.
Possible values are:
• 1 = Other
• 2 = On
• 3 = Sleep - Light
• 4 = Sleep -Deep
• 5 = Power Cycle (Off - Soft)
• 6 = Off - Hard
• 7 = Hibernate (Off - Soft)
• 8 = Off - Soft
• 9 = Power Cycle (Off-Hard)
• 10 = Master Bus Reset
• 11 = Diagnostic Interrupt (NMI)
• 12 = Off - Soft Graceful
• 13 = Off - Hard Graceful
• 14 = Master Bus Reset Graceful
• 15 = Power Cycle (Off - Soft Graceful)
• 16 = Power Cycle (Off - Hard Graceful) .. = DMTF
Reserved
• 0x7FFF..0xFFFF = Vendor Specific
RequestedPowerState
The desired or the last requested power state of the associated
Managed System Element, irrespective of the mechanism
through which the request was made. If the requested power
state is unknown, then the property has the value of 0
("Unknown"). If the property has no meaning or is not supported,
then the property has the value 12("Not Applicable").
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = On
• 3 = Sleep - Light
• 4 = Sleep -_Deep
• 5 = Power Cycle (Off - Soft)
• 6 = Off - Hard
272