Reference Guide

Property Description

• 7 = Fatal/Non recoverable - Is used to indicate an

error occurred, but it is too late to take remedial

action.

ProbableCause

An enumerated value that describes the probable cause

of the situation that resulted in the AlertIndication.

Possible values are:

• 0 = Unknown

• 1 = Other

• 2 = Adapter/Card Error

• 3 = Application Subsystem Failure

• 4 = Bandwidth Reduced

• 5 = Connection Establishment Error

• 6 = Communications Protocol Error

• 7 = Communications Subsystem Failure

• 8 = Configuration/Customization Error

• 9 = Congestion

• 10 = Corrupt Data

• 11 = CPU Cycles Limit Exceeded

• 12 = Dataset/Modem Error

• 13 = Degraded Signal

• 14 = DTE-DCE Interface Error

• 15 = Enclosure Door Open

• 16 = Equipment Malfunction

• 17 = Excessive Vibration

• 18 = File Format Error

• 19 = Fire Detected

• 20 = Flood Detected

• 21 = Framing Error

• 22 = HVAC Problem

• 23 = Humidity Unacceptable

• 24 = I/O Device Error

• 25 = Input Device Error

• 26 = LAN Error

• 27 = Non-Toxic Leak Detected

• 28 = Local Node Transmission Error

• 29 = Loss of Frame

• 30 = Loss of Signal

• 31 = Material Supply Exhausted

• 32 = Multiplexer Problem

• 33 = Out of Memory

• 34 = Output Device Error

• 35 = Performance Degraded

• 36 = Power Problem

• 37 = Pressure Unacceptable

• 38 = Processor Problem (Internal Machine Error)