Reference Guide

Property Description
managed elements. If the property value is 7 ("Active Power Utilization"), then the
PowerUtilizationMode is equal to 3
PowerUtilizationMode
Indicates the current power utilization mode implemented by the service. The mode
selection is a generally made infrequently as part of element configuration.
Possible values are:
• 0 = Unknown - Indicates the last requested state for the element is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Offline - Indicates that the element has been requested to transition to the
Enabled but Offline EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot - Refers to doing a "Shut Down" and then moving to an "Enabled" state.
• 11 = Reset - Indicates that the element is first "Disabled" and then "Enabled".
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
RequestedState
An integer enumeration that indicates the last requested or desired state for the element,
irrespective of the mechanism through which it was requested. The actual state of the
element is represented by EnabledState. This property is provided to compare the last
requested and current enabled or disabled states.
Possible values are:
• 0 = Unknown - Indicates the last requested state for the element is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Offline - Indicates that the element has been requested to transition to the
Enabled but Offline EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot - Refers to doing a "Shut Down" and then moving to an "Enabled" state.
• 11 = Reset - Indicates that the element is first "Disabled" and then "Enabled".
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
NOTE: When EnabledState is set to 5 ("Not Applicable"), then this property has no
meaning. See the EnabledState property description for explanations of the values in
the RequestedState enumeration.
177