Reference Guide

Property Description
EnabledState
An integer enumeration that indicates the enabled and disabled
states of an element. It can also indicate the transitions
between these requested states. For example, shutting down
(value=4) and starting (value=10) are transient states between
enabled and disabled.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled - Indicates that the element is or could be
executing commands, will process any queued
commands, and queues new requests.
• 3 = Disabled - Indicates that the element will not
execute commands and will drop any new requests.
• 4 = Shutting Down - Indicates that the element is in the
process of going to a Disabled state.
• 5 = Not Applicable - Indicates the element does not
support being enabled or disabled.
• 6 = Enabled but Offline - Indicates that the element may
be completing commands, and will drop any new
requests.
• 7 = In Test - Indicates that the element is in a test state.
• 8 = Deferred - Indicates that the element may be
completing commands, but will queue any new
requests.
• 9 = Quiesce - Indicates that the element is enabled but
in a restricted mode.
• 10 = Starting - Indicates that the element is in the
process of going to an Enabled state. New requests are
queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
Name
The Name property uniquely identifies the Service and provides
an indication of the functionality that is managed. This
functionality is described in more detail in the Description
property of the object.
SystemCreationClassName
The CreationClassName of the scoping System.
SystemName
The Name of the scoping System.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change - Indicates that no transition is in
progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
174