Reference Guide

Property Description
• 2 = Momentary
• 3 = Toggle
• 4..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
If the type is set to "Other", then the OtherButtonType property can be
used to further identify the type. A momentary button is one that
depressed for a moment to cause the desired affect the target device or
circuit A toggle type button is one that will remain in a switched or
depressed position until it is depressed or switched again.
CreationClassName
Indicates the name of the class or the subclass used in the creation of an
instance. When used with the other key properties of this class, this
property allows all instances of this class and its subclasses to be
uniquely identified.
DeviceID
An address or other identifying information used to uniquely name the
LogicalDevice.
EnabledDefault
An enumerated value indicating an administrator's default or startup
configuration for the Enabled State of an element.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
By default, the element is "Enabled" (value=2).
EnabledState
An integer enumeration that indicates the enabled and disabled states of
an element. It can also indicate the transitions between these requested
states.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled - Indicates that the element is or could be executing
commands, will process any queued commands, and queues new
requests.
• 3 = Disabled - Indicates that the element will not execute
commands and will drop any new requests.
• 4 = Shutting Down - Indicates that the element is in the process of
going to a Disabled state.
• 5 = Not Applicable - Indicates the element does not support being
enabled or disabled.
• 6 = Enabled but Offline - Indicates that the element may be
completing commands, and will drop any new requests.
• 7 = In Test - Indicates that the element is in a test state.
• 8 = Deferred - Indicates that the element may be completing
commands, but will queue any new requests.
152