Reference Guide

Property Description
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
SensorType
The Type of the Sensor, e.g. Voltage or Temperature Sensor. If the type is set to
"Other", then the OtherSensorType Description can be used to further identify the
type, or if the Sensor has numeric readings, then the type of the Sensor can be
implicitly determined by the Units. A description of the different Sensor types is
as follows: A Temperature Sensor measures the environmental temperature.
Voltage and Current Sensors measure electrical voltage and current readings. A
Tachometer measures speed/revolutions of a Device. For example, a Fan Device
can have an associated Tachometer which measures its speed. A Counter is a
general purpose Sensor that measures some numerical property of a Device. A
Counter value can be cleared, but it never decreases. A Switch Sensor has
states like Open/Close, On/Off, or Up/Down. A Lock has states of Locked/
Unlocked. Humidity, Smoke Detection and Air Flow Sensors measure the
equivalent environmental characteristics. A Presence Sensor detects the
presence of a PhysicalElement. A Power Consumption Sensor measures the
instantaneous power consumed by a managed element. A Power Production
Sensor measures the instantaneous power produced by a managed element
such as a power supply or a voltage regulator. A pressure sensor is used to
report pressure. Intrusion sensor reports an intrusion of an enclosure regardless
whether it was authorized or not.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Temperature
• 3 = Voltage
• 4 = Current
• 5 = Tachometer
• 6 = Counter
• 7 = Switch
• 8 = Lock
• 9 = Humidity
• 10 = Smoke Detection
• 11 = Presence
• 12 = Air Flow
• 13 = Power Consumption
• 14 = Power Production
• 15 = Pressure
• 16 = Intrusion
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
143