Reference Guide

Property Description
• 7 = In Test - Indicates that the element is in a test
state.
• 8 = Deferred - Indicates that the element may be
completing commands, but will queue any new
requests.
• 9 = Quiesce - Indicates that the element is
enabled but in a restricted mode.
• 10 = Starting - Indicates that the element is in the
process of going to an Enabled state. New
requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
For example, shutting down (value=4) and starting
(value=10) are transient states between enabled and
disabled.
HealthState
Indicates the current health of the element. This attribute
expresses the health of this element but not necessarily
that of its subcomponents.
Possible values are:
• 0 = Unknown - The implementation cannot report
on HealthState at this time.
• 5 = OK - The element is fully functional and is
operating within normal operational parameters
and without error.
• 10 = Degraded/Warning - The element is in
working order and all functionality is provided.
However, the element is not working to the best
of its abilities. For example, the element may not
be operating at optimal performance or it may be
reporting recoverable errors.
• 15 = Minor failure - All functionality is available
but some may be degraded.
• 20 = Major failure - The element is failing. It is
possible that some or all of the functionality of
this component is degraded or not working.
• 25 = Critical failure - The element is non-
functional and recovery may not be possible.
• 30 = Non-recoverable error - The element has
completely failed, and recovery is not possible.
All functionality provided by this element has
been lost.
• .. = DMTF Reserved
DMTF has reserved the unused portion of the continuum
for additional HealthStates in the future.
LowerThresholdCritical
The Sensor's threshold values specify the ranges (min
and max values) for determining whether the Sensor is
operating under Normal, NonCritical or Critical
conditions. The CurrentState is Critical once the
CurrentReading is below LowerThresholdCritical.
LowerThresholdNonCritical
The Sensor's threshold values specify the ranges (min
and max values) for determining whether the Sensor is
operating under Normal, NonCritical, Critical conditions. If
132