Reference Guide

Property Description
property, because it allows an explicit invocation of the operation and the return of a result
code.
If knowledge of the last RequestedState is not supported for the EnabledLogicalElement, the
property is NULL or has the value 12 "Not Applicable".
SystemCreationClassN
ame
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TotalOutputPower
Represents the total output power of the PowerSupply in milliWatts. 0 denotes 'unknown'.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change - Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable - Indicates the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process of
transitioning.
TypeOfRangeSwitchin
g
Describes the kind of input voltage range switching that is implemented in this PowerSupply.
Possible values are:
• 1 = Other
• 2 = Unknown
• 3 = Manual
• 4 = Autoswitch
• 5 = Wide Range
• 6 = Not Applicable
A value other than 5 or 12 identifies the state to which the element is in the process of
transitioning.
DCIM_Battery
Property Description
BatteryStatus
Description of the charge status of the Battery.
Possible values are:
• 1 = Other
• 2 = Unknown
112