Reference Guide

Property Description
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable - Indicates the implementation does not support
representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the
process of transitioning.
DCIM_Fan
Property Description
ActiveCooling
ActiveCooling is a Boolean that indicates that the Cooling
Device provides active (as opposed to passive) cooling.
CreationClassName
Indicates the name of the class or the subclass used in the
creation of an instance. When used with the other key
properties of this class, this property allows all instances of
this class and its subclasses to be uniquely identified.
DeviceID
An address or other identifying information used to uniquely
name the LogicalDevice.
ElementName
A user-friendly name for the object. This property allows each
instance to define a user-friendly name in addition to its key
properties, identity data, and description information.
NOTE: The Name property of ManagedSystemElement is
also defined as a user-friendly name. But, it is often
subclassed to be a Key. It is not reasonable that the same
property can convey both identity and a user-friendly
name, without inconsistencies. Where Name exists and is
not a Key (such as for instances of LogicalDevice), the
same information can be present in both the Name and
ElementName properties.
EnabledDefault
An enumerated value indicating an administrator's default or
startup configuration for the Enabled State of an element.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
By default, the element is "Enabled" (value=2).
EnabledState
An integer enumeration that indicates the enabled and
disabled states of an element. It can also indicate the
transitions between these requested states. For example,
101