Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
DCIM_DesktopMonitor
Bandwidth Monitor's bandwidth in MHertz. If unknown, enter 0.
Brightness
This property represents the brightness/Luminance of the video output. The property value is from 0 to the MaxBrightness property value. If the Brightness property is implemented but the brightness is unknown at the
time, the property has a value 0x80000000.
Caption The Caption property is a short textual description (one- line string) of the object.
ColorCodeFormatSupported Color code format supported.
ColorDepthBits Color Bit Depth.
ColorModePreset
This property defines a specified color temperature of the display.
Possible values are:
0 = Unknown
2 = sRGB
3 = Display Native
4 = 4000K
5 = 5000K
6 = 6500K
7 = 7500K
8 = 8200K
9 = 9300K
1011 = 10000K
12 = 11500K
13 = User 1
14 = User
2 .. = User 3
32768..65535 = DMTF Reserved
ColorModePresetCapabilities
This property lists the allowed values for ColorModePreset.
Possible values are:
0 = Unknown
2 = sRGB
3 = Display Native
4 = 4000K
5 = 5000K
6 = 6500K
7 = 7500K
8 = 8200K
9 = 9300K
1011 = 10000K
12 = 11500K
13 = User 1
14 = User
.. = User 3
32768..65535 = DMTF Reserved
CommunicationStatus
Indicates the ability of the instrumentation to communicate with the underlying ManagedElement. A Null return indicates the implementation (provider) does not implement this property.
Possible values are:
0 = Unknown - Indicates the implementation is in general capable of returning this property, but is unable to do so at this time.
1 = Not Available - Indicates that the implementation (provider) is capable of returning a value for this property, but not ever for this particular piece of hardware/software or the property is intentionally not used because
it adds no meaningful information (as in the case of a property that is intended to add additional info to another property).
2 = Communication OK - indicates communication is established with the element, but does not convey any quality of service.
3 = Lost Communication - Indicates that the Managed Element is known to exist and has been contacted successfully in the past, but is currently unreachable.
4 = No Contact - Indicates that the monitoring system has knowledge of this element, but has never been able to establish communications with it.
.. = DMTF Reserved
0x8000.. = Vendor Reserved
CompositSyncSignalOnGreenVideoSupported Composite Sync Signal on Green video is supported.
CompositSyncSignalOnHorizontalSupported Composite Sync Signal on Horizontal is supported.
ContinuousFrequency For EDID 1.3, this bit indicated support for or no support for GTF(using the default GTF parameter values). For EDID 1.4 this bit has been redefined to indicate Continuous frequency(1) or Non-Continuous Frequency(0).
Contrast
This property represents the contrast of the video output. The property value is from 0 to the MaxContrast property value. If the Contrast property is implemented but the contrast is unknown at the time, the property has
a value 0x80000000.
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and its subclasses to be uniquely
identified.
CurrentResolutionH This property indicated the current horizontal resolution in pixels.
CurrentResolutionV This property indicated the current vertical resolution in pixels.
Description Provides a textual description of the object.
DeviceID An address or other identifying information used to uniquely name the LogicalDevice.
DisplayCharacteristics
This array property represents various characteristics of a video output device. StandbyModeSupported: the video output device can go into a stand by mode, SuspendModeSupported: the video output device can go into a
suspend mode, VeryLowPowerSupported: the video output go into a very low power mode. If DisplayCharacteristics is implemented but the value is unknown, the property has an Unknown value.
Possible values are:
0 = Unknown
2 = StandbyModeSupported
3 = SuspendModeSupported
4 = VeryLowPowerSupported
.. = DMTF Reserved
32768..65535 = Vendor Reserved
DisplayMode
This property permits the selection of a preset optimized by manufacturer for an application type or the selection of a user defined setting.
Possible values are:
2 = Standard/default mode
3 = Productivity
4 = Mixed
5 = Movie
6 = User defined
7 = Games
8 = Sports
9 = Professional
10 = Standard (intermediate power)