Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
1GB
VT for Direct IO
Intel Virtualization Technology for Direct I/O (VT-d) – new chipset feature that enhances I/O support (DMA) when running a Virtual Machine Monitor.
Possible values are:
Disable
Enable
Wake On LAN
This property defines whether Wakeup On LAN is disabled, enabled for on-board NIC only or enabled for add-in NIC only. If Enabled with boot to NIC option is
selected, the system boots from the NIC boot-ROM upon a remote wakeup
Possible values are:
Disable
Add-in
On board
LAN
PXE boot enable
LAN or WLAN
WLAN only
Enable all
Wake-On-LAN Boot Override
If enabled then when the system powers on due to a Wake-on-LAN event, the NIC boot-ROM is automatically given the highest boot priority, pre-pending the PXE
boot-ROM to the system’s current boot sequence. If the system powers on due to some other event, this selection does not influence the boot sequence. If disabled
then the boot override feature is disabled and the system boot sequence is in effect for all types of system power on.
Possible values are:
Disable
Enable
Watchdog Timer
The system will/will not reboot/reset if the watchdog timer expires
Possible values are:
Disable
Enable
Wireless Adapter
Enable/Disable Wireless Adapter.
Possible values are:
Disable
Auto
Wireless Device
If disabled then wireless devices are always disabled.
If set to APP then wireless devices can be controlled by an application such as QuickSet
If set to Hotkey then wireless devices can be controlled by an application such as QuickSet
Possible values are:
Disable
APP
Hotkey
WiFi Catcher Changes
Permits or Denies WiFi Catcher changes. If the administrator password is not set, this setting will have no effect.
Possible values are:
Deny
Permit
WiFi Locator
Enables or Disables the WiFi Locator.
Possible values are:
Disable
Enable
Wireless LAN
Enables or Disables the wireless LAN module.
Possible values are:
Disable
Enable
Wireless Switch Bluetooth Control
Enables or Disables wireless switch Bluetooth control.
Possible values are:
Disable
Enable
Wireless Switch Cellular Control
Enables or Disables wireless switch cellular control. This switch has no effect on the state of the cellular radio for systems with a physical wireless on/off switch.
Possible values are:
Disable
Enable
Wireless Switch Change
Permits or Denies Wireless Switch changes. If the administrator password is not set, this setting will have no effect.
Possible values are:
Deny
Permit
Wireless Switch Wireless LAN Control
Enables or Disables wireless switch wireless LAN control. This switch has no effect on the state of the wireless LAN radio for systems with a physical wireless on/off
switch.
Possible values are:
Disable
Enable
Wireless UWB
Enable/Disable UWB card.
Possible values are:
Disable
Enable
WxAN Radio
Possible values are:
Disable
WLAN on
WWAN on
If set to 'disable' then it disables both WLAN and WWAN;