Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
COM2
COM4
COM3
COM4
Serial Port 2
This property defines the serial port 2 configuration. (SerialPort2Configuration property in OMCI7.x)
Possible values are:
Disable
Auto
COM2
COM4
SERR DMI Message
Enables or Disables SERR DMI Messages.
Possible values are:
Off
On
Set CMOS To Default
Request or don't request a default of CMOS values on the next boot.
Possible values are:
Disable
Enable
Signed Firmware Update
Enforces the verification of digital signatures in the BIOS update payload before updating the BIOS. Once enabled, the system BIOS cannot be updated to any
revision that does not contain a valid digital signature.
Possible values are:
Disable
Enable
SmartCard Reader
Enables or Disables the Smart Card Reader.
Possible values are:
Off
Enable
SMART Errors
Enables or Disables SMART Errors.
Possible values are:
Disable
Enable
Sound Device
Status of the system's built-in sound device. (IntegratedAudio property in OMCI7.x)
Possible values are:
Disable
Enable
Speaker
The volume of the speaker.
Possible values are:
Disable
Enable
Low
Medium
High
SpeedStep
Sets SpeedStep to Automatic, Disabled, Max Performance, or Max Battery.
Possible values are:
Disable
Maximum performance
Maximum battery life
Auto
Splash Screen
Enable/Disable the Splash Screen.
Possible values are:
Disable
Enable
Spread Spectrum
Enables or disables the spread spectrum clock in the system.
Possible values are:
E
nable
Disable
SR-IOV Global
Enable/Disable BIOS support for SRIOV devices.
Possible values are:
Disable
Enable
Standby State
Selects the power management suspend mode. (SuspendMode property in OMCI 7.x)
Possible values are:
Standby S1
Standby S3
Stealth Mode
Enables or disables the pre-programmed stealth mode of operation of the system.
Possible values are:
Disable
Enable
Strong Password
Enable/Disable Strong Password.
Possible values are:
Disable
Enable
This feature will allow user to enable SurroundView that allow user to use an additional AMD PCIE video card in conjunction with the onboard graphics card which
would give you ability to use multiple monitors at once. Notes: it's only for AMD platform/ disable SurroundView thatdisable multiple monitor support with additional