Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
Mouse Possible values are:
Disable
Enable
Monitor Toggling
Enables or Disables Monitor Toggling.
Possible values are:
Disable
Enable
Multi-Display
Enables or disables the multi-display feature, that is integrated and add-in Gfx.
Possible values are:
Disable
Enable
NIC
This property defines whether the built-in NIC is enabled or disabled. (BuiltinNIC property in OMCI7.X)
Possible values are:
Disable
Enable
Enable non PXE
Enable iSCSI
Enable RPL
Enable image server
NIC 2
This property defines whether the built-in NIC2 is enabled or disabled. (BuiltinNIC2 property in OMCI7.X)
Possible values are:
Disable
Enable
Enable non PXE
Enable iSCSI
Enable RPL
Enable image server
Network Activity LED
This selection will allow the Activity LED to be controlled by an ACPI OS and driver/ set Activity LED as a wireless LAN radio on/off indicator/ force the Activity LED
to be always OFF.
Possible values are:
Disable
Enable ACPI OS control
Wireless LAN Indicator
Node Interleaving
Enables or Disables Node Interleave.
Possible values are:
Disable
Enable
NMI Button
Enables or Disables the NMI Button.
Possible values are:
Enable
Disable
Num Lock
Enables or Disables Num Lock.
Possible values are:
Disable
Enable
On Reader
Enables or Disables the Dell Latitude/Precision Workstation/Optiplex On Reader feature.
Possible values are:
Disable
Enable
Onboard Modem
Enables or Disables the Onboard Modem.
Possible values are:
Disable
Enable
Onboard 1394
Enables or Disables on-board 1394 controller on next boot.
Possible values are:
Disable
Enable
On-board Serial ATA 2 Controller
Enable or disables on-board Serial ATA 2 controller.
Possible values are:
Enable
Disable
Optical Drive Controller
Enable/Disable the Optical Drive Controller.
Possible values are:
Enable
Disable
Optimus
Enables or disables the Optimus.
Possible values are:
Enabled
Disabled
OpRomUIProtection
Prompts you to enter the administrator password to enter the OptionROM user interface if the password has been set.
Possible values are:
Enable
Disable