Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
FX100 BIOS Access
Allows or blocks the remote user to access BIOS Setup via FX100 Portal.
Possible values are:
On
Off
General Purpose Encryption
Enables or disables the general purpose encryption (GPE) on the system.
Possible values are:
Enable
Disable
Hard Drive Free Fall Protection
Enable/Disable hard drive free fall protection.
Possible values are:
Disable
Enable
Hard-Disk Failover
Specifies which devices in the Hard-Disk Drive Sequence menu are attempted in the boot sequence. When set to OFF, only the first device in the list is attempted.
When set to ON, all devices are attempted in order, as listed in the Hard-Disk Drive Sequence.
Possible values are:
Disable
Enable
Hard Disk Acoustic Mode
Sets the Hard Disk Acoustic Mode.
Possible values are:
Bypass
Quiet
Suggested
Performance
Hardware Prefetcher
Enable/Disable the CPU’s HW prefetcher.
Possible values are:
Disable
Enable
Hard Drive Free Fall Protection
Enable/Disable hard drive free fall protection.
Possible values are:
Disable
Enable
Hardware Prefetch Training on Software Prefetch
Prevents hardware prefetcher from considering software prefetches when detecting strides for prefetch requests./Hardware prefetcher considers software prefetches
when detecting strides for prefetch requests.
Possible values are:
Disable
Enable
HDD Protection
If setting "On", the HDD Protection OPROM will be loaded. If setting "Off", the HDD Protection OPROM will be not loaded.
Possible values are:
Off
On
Hot Undocking
Enables or Disables warm and hot docking/undocking.
Possible values are:
Disable
Enable
Hotkey to toggle WxAN Radio
Enable/Disable hotkey to toggle WxAN radio.
Possible values are:
Disable
Enable
Integrated RAID
Enables or Disables the Integrated RAID Controller.
Possible values are:
Disable
Enable
Integrated SAS
Enables or Disables the Integrated SAS Controller.
Possible values are:
Disable
Enable
Integrated USB Hub
Sets the Integrated USB Hub to Compatible or High Speed.
Possible values are:
Disable
Enable
Internal USB Port
Enable/Disable the Internal USB.
Possible values are:
Disable
Enable
IDE
This property defines whether the IDE controller is enabled or disabled.
Possible values are:
Disable
Auto
Instant ON
Enable/Disable the Latitude on Instant ON feature.
Possible values are:
Disable
Enable