Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
3 = Disable
4 = Auto
5 = COM1
6 = COM2
7 = COM3
8 = COM4
SerialPort2Configuration This property defines the serial port 2 configuration.
Possible values are:
1 = Other
2 = Unsupported
3 = Disable
4 = Auto
5 = COM2
6 = COM4
SERRDMIMessage Enables or Disables SERR DMI Messages.
Possible values are:
1 = Other
2 = Unsupported
3 = On
4 = Off
SetCMOSToDefault Request or don't request a default of CMOS values on the next boot.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
SettingID The identifier by which the Setting object is known.
SingleByteECCLogging BIOS has disabled reporting/logging or Single Byte ECC errors in the chipset. This property is read-only.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
SingleCoreTurboMode
Enables or Disables Single Core Turbo Mode.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Off
SmartCardReader Enables or Disables the Smart Card Reader.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Off
SMARTErrors Enables or Disables SMART Errors.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
SpeakerVolume The volume of the speaker.
Possible values are:
1 = Other
2 = Unsupported
3 = Off
4 = Low
5 = Medium
6 = High
7 = Enable
SpeedStep
Sets SpeedStep to Automatic, Disabled, Max Performance, or Max Battery.
Possible values are:
1 = Other
2 = Unsupported
3 = Automatic
4 = Disabled
5 = Max Performance
6 = Max Battery
Splash Screen Enable/Disable the Splash Screen.
Possible values are:
1 = Other
2 = Unsupported