Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
NoExecute Enables or Disables the No Execute (NX) flag.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
NumberOfCoresPerProcessor Rolls the number of enabled cores in each processor. By default, the maximum number of cores per processor will be enabled.
Possible values are:
1 = Other
2 = Unsupported
3 = 1 Core
4 = 2 Cores
5 = 4 Cores
6 = 6 Cores
7 = 8 Cores
8 = 10 Cores
9 = 12 Cores
10 = All
NumLock Enables or Disables Num Lock.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
Onboard1394 Enables or Disables on-board 1394 controller on next boot.
Possible values are:
1 = Other
2 = Unsupported
3 = Disabled
4 = Enabled
OnboardModem Enables or Disables the Onboard Modem.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
OnReader Enables or Disables the Dell Latitude/Precision Workstation/Optiplex On Reader feature.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
OpticalDriveController Enable/Disable the Optical Drive Controller.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
OSInstallMode Enables or Disables OS Install Mode (Limit System Memory feature).
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
ParallelPortConfiguration This property defines the parallel port configuration.
Possible values are:
1 = Other
2 = Unsupported
3 = Disabled
4 = LPT1
5 = LPT2
6 = LPT3
ParallelPortMode This property defines the parallel port mode.
Possible values are:
1 = Other
2 = Unsupported
3 = AT
4 = PS/2
5 = ECP, No DMA
6 = EPP
7 = ECP, DMA 1
8 = ECP, DMA 3