Reference Guide
The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
3 = Enabled
4 = Disabled
5 = Silent Enabled
ChassisIntrusionStatus This property shows the status of the system with regards to Chassis Intrusion (Detected or Not Detected). A value of Unknown indicates one of two things: either
Chassis Intrusion is not supported by this system, or Chassis Intrusion event reporting has been disabled by the user. If the value is Detected, the user may set it to Not
Detected to enable the system to receive the next event and to stop generating events for now.
Possible values are:
1 = Other
2 = Unsupported
3 = Detected
4 = Not Detected
5 = Clear
ClearSystemEventLog
Prevents or causes the system event log to be cleared in the next boot.
Possible values are:
1 = Other
2 = Unsupported
3 = No
4 = Yes
CoolAndQuiet Enables or Disables AMD Cool and Quiet processor feature.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
CPUVirtualization Enables or Disables CPU Virtualization.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
CStatesControl Enable/Disable the C States Control.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
DellInstanceID This property defines the instance ID of this class.
Description A short description of the device.
DRAMPrefectcher Prevents DRAM references from triggering DRAM prefetch requests./Turns on the DRAM prefetch unit in the Northbridge.
Possible values are:
1 – Other
2 – Unsupported
3 – Enabled
4 - Disabled
EnableInstantON Enable/Disable the Latitude on Instant ON feature.
Possible values are:
1 – Other
2 – Unsupported
3 – Enabled
4 - Disabled
EnableInternalWirelessUWB Enable/Disable UWB card.
Possible values are:
1 – Other
2 – Unsupported
3 – Enabled
4 - Disabled
EnableLatitudeON
Enable/Disable the Enable Latitude ON.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
EnableLatitudeONFlash Enable/Disable the ability to boot to the Latitude ON Flash module.
Possible values are:
1 – Other
2 – Unsupported
3 – Enabled
4 - Disabled
eSATAPort Sets the external Serial ATA port to On/Off.
Possible values are:
1 – Other
2 – Unsupported
3 – Off
4 - Auto