Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
Possible values are:
1 = Other
2 = Unsupported
3 = Diskette First
4 = Hard Disk Only
5 = Device List
6 = CD ROM First
BuiltinFloppy This property defines whether the built-in Floppy controller is enabled, auto or read-only.
Possible values are:
1 = Other
2 = Unsupported
3 = Disabled
4 = Auto
5 = Read-Only
6 = USB
7 = Internal
BuiltinNIC This property defines whether the built-in NIC is enabled or disabled.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled with PXE Boot
4 = Disabled
5 = Enabled
6 = Enabled with RPL Boot
7 = Enabled with iSCSI Boot
8 = Enabled with ImageServer Boot
BuiltinNIC2 This property defines whether the built-in NIC2 is enabled or disabled.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled with PXE Boot
4 = Disabled
5 = Enabled
7 = Enabled with iSCSI Boot
BuiltinPointingDevice This property defines whether the built-in pointing device port is enabled or disabled.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
BusRatio Bus Ratio.
Possible values are:
1 = Other
2 = Unsupported
3 = Max
4 = 6.0x
5 = 7.0x
6 = 7.5x
7 = 8.0x
8 = 8.5x
9 = 9.0x
10 = 9.5x
Camera Enable/Disable Camera.
Possible values are:
1 – Other
2 – Unsupported
3 – Enabled
4 - Disabled
Caption The caption of the device.
CellularRadio Enables or Disables the cellular radio, that is, the WWAN module.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
Charger This property define the charger details.
Possible values are:
1 = Other
2 = Unsupported
ChassisIntrusion Enables the system to detect and report Chassis Intrusion events to the system display on boot-up.
Possible values are:
1 = Other
2 = Unsupported