Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
Support This property defines whether remote flash BIOS updates are supported by this system.
Possible values are:
1 = This system supports remote flash BIOS update
2 = This system does not support remote flash BIOS update
Dell_SMBIOSSettings
AGPSlot Enables or disables the on-board AGP slot.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
AmbientLightSensor Enables or Disables the Ambient Light Sensor.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
ASFMode
Sets the ASF (Alert Standard Format) mode.
Possible values are:
1 = Other
2 = Unsupported
3 = Disabled
4 = Enabled
5 = AlertingOnly
6 = DASH and ASF2.0
AudioMode Onboard audio mode. Disabled mode completely un-assigns the onboard hardware resources. Half duplex mode allows only record or playback. Full duplex mode can
record and playback sounds simultaneously.
Possible values are:
1 = Other
2 = Unsupported
3 = Disabled
4 = Half Duplex
5 = Full Duplex
AutoOn This property defines the auto-on configuration: disabled, everyday or weekdays (Monday-Friday).
Possible values are:
1 = Other
2 = Unsupported
3 = Disabled
4 = Every day
5 = Weekdays
AutoOnHour This defines the hour when to turn on the system (0-23).
Possible values are:
1 = Other
2 = Unsupported
AutoOnMinute This defines the minutes when to turn on the system (0-59).
Possible values are:
1 = Other
2 = Unsupported
Bitsmart Enable/Disable the Bitsmart.
Possible values are:
1 = Other
2 = Unsupported
3 = Enable
4 = Disable
BluetoothDevice Enables or disables Bluetooth Device.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
BootMode Enables booting to Unified Extensible Firmware Interface (UEFI) capable operating systems. This ensures compatibility with operating systems that do not support UEFI.
Possible values are:
1 = Other
2 = Unsupported
3 =
UEFI
4 = BIOS
BootSequence This defines the boot sequence for the next system boot. Boot Sequence information can be found under the class
Dell_BootDeviceSequence with OMCI 6.1.