Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
5 = Medium
6 = High
7 = Enable
Dell_PowerManagementSettings
Brightness
The brightness that will be used for the system power management. There is a setting for Battery and a setting for AC, to allow the user some control over the amount of
power being used for display. There are 8 settings from dimmest to brightest.
Possible values are:
0 = Minimum
1 = 1
2 = 2
3 = 3
4 = 4
5 = 5
6 = 6
7 = Maximum
8 = Unsupported
Caption The caption of the device.
DellInstanceID This property defines the instance ID of this class.
Description A short description of the device.
SettingID The identifier by which the Setting object is known.
Dell_PowerManagementSettingsOnBattery
Brightness The brightness that will be used for the system power management. There is a setting for Battery and a setting for AC, to allow the user some control over the amount of
power being used for display. There are 8 settings from dimmest to brightest.
Possible values are:
0 = Minimum
1 = 1
2 = 2
4 = 4
5 = 5
6 = 6
7 = Maximum
8 = Unsupported
Caption The caption of the device.
DellInstanceID This property defines the instance ID of this class.
Description A short description of the device.
SettingID The identifier by which the Setting object is known.
Dell_RemoteFlashBIOSSettings
Caption The caption of the device.
CompletionCode This property defines the completion code of the last BIOS update.
Possible values are:
1 = Other
2 = Unknown
3 = Completed successfully
4 = Bad Image
5 = Could not access flash
6 = Flash memory not ready
7 = Currently disabled
8 = Battery must be installed
9 = Fully charged battery must be installed
10 = External power adapter must be connected
11 = 12 Volts could not be set
12 = 12 Volts could not be removed
13 = A flash memory failure occurred
14 = A general failure occurred
15 = A data miscompare error occurred
16 = The image could not be found in memory
17 = No update operation has been performed
DellInstanceID This property defines the instance ID of this class.
Description A short description of the device.
EnableUpdate This property is used by Dell OpenManage to enable a Remote Flash BIOS update on the next boot. Dell OpenManage Client Administrator (OMCA) will automatically set
this property to Enabled during remote flash BIOS operations.
Possible values are:
1 = Other
2 = Unknown
3 = Enable
4 = Disable
LastBIOSUpdate This property defines the date of last BIOS update.
MinimumSizeofContiguousMemory This property defines the minimum size of contiguous memory required for remote BIOS update.
SettingID The identifier by which the Setting object is known.