Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
1 = This device is the first in the list
2 = This device is the second in the list, and so on.
DellInstanceID Index used to identify this boot device.
Status Set to Enabled if this device is enabled in the boot sequence, Set to Disabled if this device is disabled in the boot sequence.
Possible values are:
0 = Disabled
1 = Enabled
Dell_Configuration
ACPowerRecoveryMode This attribute allows the setting of the AC Power Recovery Mode in BIOS. Unsupported means that this system BIOS does not support the setting of the AC Power
Recovery Mode.
Possible values are:
1 = Other
2 = Unsupported
3 = Off
4 = Last
5 = On
BootPasswordVerification This property indicates the result of the last BIOS boot password verification operation executed by the system. A verification occurs each time Dell OpenManage prompts
the user to enter a password.
Possible values are:
0 = Password not matched
1 = Password matched
2 = Not yet verified
3 = Password disabled by jumper
4 = Password not enabled
Caption The caption of the device.
Description A short description of the device.
EnableDisableBIS This property allows the enabling/disabling of the Boot Integrity Services (BIS) in BIOS. Unsupported means that this system BIOS does not support BIS.
Possible values are:
1 = Other
2 = Unsupported
3 = Accept
4 = Deny
5 = Reset
ForcePXEonNextBoot This attribute allows the enabling/disabling of Force PXE on Next Boot in BIOS. Unsupported means that this system BIOS does not support Force PXE on next boot.
Possible values are:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
GlobalStatus This property defines the global status of the system.
Possible values are:
1 = Other
2 = Unknown
3 = OK
4 = Non-critical
5 = Critical
6 = Non-recoverable
GlobalStatusInfo Integer-valued array to indicate the global status of the system.
Possible values are:
0 = ECC Error
1 = Chassis Intrusion
2 = Drive Space Low
3 = Fan Status
4 = Temperature Status
5 = Voltage Status
6 = Electrical Current Status
Infrared The setting of the Infrared port.
Possible values are:
0 = Unsupported
1 = Disabled
2 = COM1
3 = COM2
4 = COM3
5 = COM4
KeyboardErrorReporting This attribute allows the enabling/disabling of Keyboard Error Reporting in BIOS. Unsupported means that this system BIOS does not support Keyboard Error Reporting.
Possible values are:
1 = Other
2 = Unsupported