Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
UpperThresholdFatal
The Sensor's threshold values specify the ranges (min and max values) for determining whether the Sensor is operating under Normal, NonCritical, Critical or Fatal conditions. If the
CurrentReading is above UpperThresholdFatal, then the CurrentState is Fatal.
UpperThresholdNonCritical
The Sensor's threshold values specify the ranges (min and max values) for determining whether the Sensor is operating under Normal, NonCritical, Critical or Fatal conditions. If the
CurrentReading is between LowerThresholdNonCritical and UpperThresholdNonCritical, then the Sensor is reporting a normal value. If the CurrentReading is between
UpperThresholdNonCritical and UpperThresholdCritical, then the CurrentState is NonCritical.
Dell_VoltageSensor
BaseUnits
The base unit of the values returned by this Sensor.
Possible values are:
0 = Unknown
1 = Other
2 = Degrees C
3 = Degrees F
4 = Degrees K
5 = Volts
6 = Amps
7 = Watts
8 = Joules
9 = Coulombs
10 = VA
11 = Nits
12 = Lumens
13 = Lux
14 = Candelas
15 = kPa
16 = PSI
17 = Newtons
18 = CFM
19 = RPM
20 = Hertz
21 = Seconds
22 = Minutes
23 = Hours
24 = Days
25 = Weeks
26 = Mils
27 = Inches
28 = Feet
29 = Cubic Inches
30 = Cubic Feet
31 = Meters
32 = Cubic Centimeters
33 = Cubic Meters
34 = Liters
35 = Fluid Ounces
36 = Radians
37 = Steradians
38 = Revolutions
39 = Cycles
40 = Gravities
41 = Ounces
42 = Pounds
43 = Foot-Pounds
44 = Ounce-Inches
45 = Gauss
46 = Gilberts
47 = Henries
48 = Farads
49 = Ohms
50 = Siemens
51 = Moles
52 = Becquerels
53 = PPM (parts/million)
54 = Decibels
55 = DbA
56 = DbC
57 = Grays
58 = Sieverts
59 = Color Temperature Degrees K
60 = Bits
61 = Bytes
62 = Words (data)
63 = DoubleWords
64 = QuadWords
65 = Percentage
Caption The caption of the device.
CreationClassName
Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all
instances of this class and its subclasses to be uniquely identified.
CurrentReading The current value indicated by the Sensor.
Description A short description of the voltage sensor.
DeviceID An address or other identifying information to uniquely name the logical device.
Location
Identifies the physical location of the voltage probe.
Possible values are:
1 = Other
2 = Unknown
3 = Processor
4 = Disk
5 = Peripheral Bay