Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
Dell_VideoController
Caption The caption of the device.
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property
allows all instances of this class and its subclasses to be uniquely identified.
CurrentBitsperPixel The number of bits used to display each pixel.
CurrentHorizontalResolution Current number of horizontal pixels.
CurrentNumberofColumns If in character mode, number of columns for this Video Controller. Otherwise, enter 0.
CurrentNumberofRows If in character mode, number of rows for this Video Controller. Otherwise, enter 0.
CurrentRefreshRate Current refresh rate in Hertz.
CurrentScanMode
Current scan mode.
Possible values are:
1 = Other
2 = Unknown
3 = Interlaced
4 = Non Interlaced
CurrentVerticalResolution Current number of vertical pixels.
Description A short description of the video controller.
DeviceID An address or other identifying information to uniquely name the logical device.
DriverDate The DriverDate property indicates the last modification date and time of the currently-installed video driver.
DriverVersion The DriverVersion property indicates the version number of the video driver.
InstalledDisplayDrivers The InstalledDisplayDrivers property indicates the name of the installed display device driver.
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
VideoMemoryType An integer enumeration indicating the type of video memory.
Possible values are:
1 = Other
2 = Unknown
3 = VRAM
4 = DRAM
5 = SRAM
6 = WRAM
7 = EDO RAM
8 = Burst Synchronous DRAM
9 = Pipelined Burst SRAM
10 = CDRAM
11 = 3DRAM
12 = SDRAM
13 = SGRAM
VideoMode Current video mode.
VideoModeDescription The VideoModeDescription property indicates the current resolution, color, and scan mode settings of the video controller.
SENSORS
This section provides information about sensors. Table 1-6 lists Dell OMCI Sensors classes and properties.
Table 1-6: Dell OpenManage Client Instrumentation Sensors Classes and Properties
Dell_CurrentSensor
The base unit of the values returned by this Sensor.
Possible values are:
0 = Unknown
1 = Other
2 = Degrees C
3 = Degrees F
4 = Degrees K
5 = Volts
6 = Amps
7 = Watts
8 = Joules
9 = Coulombs
10 = VA
11 = Nits
12 = Lumens
13 = Lux
14 = Candelas
15 = kPa
16 = PSI
17 = Newtons
18 = CFM
19 = RPM