Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
9 = Charging and Critical
10 = Undefined
11 = Partially Charged
Chemistry An enumeration that describes the Battery's chemistry.
Possible values are:
1 = Other
2 = Unknown
3 = Lead Acid
4 = Nickel Cadmium
5 = Nickel Metal Hydride
6 = Lithium-ion
7 = Zinc air
8 = Lithium Polymer
DesignCapacity The design capacity of the battery in mWatt-hours. If this property is not supported, enter 0.
DesignVoltage The design voltage of the battery in mVolts. If this attribute is not supported, enter 0.
DeviceID An address or other identifying information to uniquely name the logical device.
EstimatedChargeRemaining An estimate of the percentage of full charge remaining.
EstimatedRunTime EstimatedRunTime is an estimate in minutes of the time to battery charge depletion under the present load conditions if the utility power is off, or lost and remains
off, or a Laptop is disconnected from a power source.
Location The location of the battery
ManufactureDate The battery manufacture date.
Manufacturer The name of the company that manufactured the battery.
MaximumError The maximum error (as a percentage) in the Watt-hour data reported by the battery. The maximum error indicates the upper bound on how much additional energy
the battery may have above the energy it reports having. When this value exceeds some value, for instance, 10%, some action must be taken (for instance, fully
discharge then fully charge the battery) within some specified time (for instance, within two recharge cycles of the battery). If the action is not taken within the
time frame, the error value will continue to rise. If this property is not supported, value = -1
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
RemainingCapacity The battery's remaining capacity in mWatt-hours. This value is used with Design Capacity or Full Charge Capacity to calculate fuel gauge information.If this property
is not supported, value = -1.
SerialNumber The serial number for this battery.
SmartBatteryVersion The Smart Battery Data Specification version number supported by this Battery. If the Battery does not support this function, the value should be left blank.
Status This property indicates the current status of the logical device.
Possible values are:
OK
Error
Degraded
Unknown
Pred Fail
Starting
Stopping
Service
Stressed
NonRecover
No Contact
Lost Comm
Stopped
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
Dell_Chassis
AssetTag The Asset Tag of the system.
BootupState The current state of this system when it booted.
Possible values are:
1 = Other
2 = Unknown
3 = OK
4 = Warning
5 = Critical
6 = Non-Recoverable
BreachDescription BreachDescription is a free-form string providing more information if the SecurityBreach property indicates that a breach or some other security-related event
occurred.
Caption The caption of the device.
ChassisTypes An enumerated, integer-valued array indicating the type of Chassis.
Possible values are:
1 = Other
2 = Unknown
3 = Desktop
4 = Low Profile Desktop
5 = Pizza Box
6 = Mini Tower
7 = Tower
8 = Portable
9 = LapTop
10 = Notebook
11 = Hand Held