Reference Guide

The Reference Guide contains the
file:///T|/htdocs/SOFTWARE/smcliins/cli81/en/refgd/index.html[10/19/2012 10:01:19 AM]
RequestedState
statuses of EnabledState. These are "Reboot" (10) and "Reset" (11).
Shut Down requests an orderly transition to the Disabled state, and may involve removing power, to completely erase any existing state. The Disabled state requests an immediate disabling of the element, such that it will
not execute or accept any commands or processing requests. This property is set as the result of a method invocation (such as Start or StopService on CIM_Service), or can be overridden and defined as WRITEable in a
subclass. The method approach is considered superior to a WRITEable property, because it allows an explicit invocation of the operation and the return of a result code. If knowledge of the last RequestedState is not
supported for the EnabledLogicalElement, the property is NULL or has the value 12 "Not Applicable".
Possible values are:
0 = Unknown
2 = Enabled
3 = Disabled
4 = Shut Down
5 = No Change
6 = Offline
7 = Test
8 = Deferred
9 = Quiesce
10 = Reboot - Refers to doing a "Shut Down" and then moving to an "Enabled" state.
11 = Reset - Indicates that the element is first "Disabled" and then "Enabled".
12 = Not Applicable
.. = DMTF Reserved
32768..65535 = Vendor Reserved
ScalerManufacturer
The name of the manufacturer of the controller chip used in a particular display.
Possible values are:
1 = Other
2 = Conexant
3 = Genesis
4 = Macronix
5 = MRT
6 = Mstar
7 = Myson
8 = Philips
9 = Pixelworks
10 = RealTek
11 = Sage
12 = SiliconImage
13 = SmartASIC
14 = STMicroelectronics
15 = Topro
16 = Trumpion
17 = WellTrend
18 = Samsung
19 = Novatek
20 = STK
.. = DMTF Reserved
32768..65535 = Vendor Reserved
SerialNumber Serial number of the monitor. Come from EDID.
SeparateSyncHVSupported Separate Sync H & V Signals are supported.
sRGBStandardDefaultColorSpace If this bit is set to 1, the display uses the sRGB standard default color space as its primary color space.
StandbyModeSupported
This property represents if the video output device can go into a stand by mode.
Possible values are:
0 = Unknown
2 = Supported
3 = Not Supported
.. = DMTF Reserved
32768..65535 = Vendor Reserved
SuspendModeSupported
This property represents if the video output device can go into a suspend mode.
Possible values are:
0 = Unknown
2 = Supported
3 = Not Supported
.. = DMTF Reserved
32768..65535 = Vendor Reserved
SystemCreationClassName The CreationClassName of the scoping system.
SystemName The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
0 = Unknown
2 = Enabled
3 = Disabled
4 = Shut Down
5 = No Change - Indicates that no transition is in progress.
6 = Offline
7 = Test
8 = Defer
9 = Quiesce
10 = Reboot
11 = Reset
12 = Not Applicable - Indicates the implementation does not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process of transitioning.
VeryLowPowerSupported
This property represents if the video output device can go into a very low power mode.
Possible values are:
0 = Unknown
2 = Supported
3 = Not Supported
.. = DMTF Reserved
32768..65535 = Vendor Reserved