Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli80/EN/refgd/index.htm[10/19/2012 9:56:27 AM]
7 - Zinc air
8 - Lithium Polymer
DesignCapacity The design capacity of the battery in mWatt-hours. If this property is not supported, enter 0.
DesignVoltage The design voltage of the battery in mVolts. If this attribute is not supported, enter 0.
DeviceID An address or other identifying information to uniquely name the logical device.
EstimatedChargeRemaining An estimate of the percentage of full charge remaining.
EstimatedRunTime
An estimate in minutes of the time to battery charge depletion under the present load conditions if the utility
power is off, or lost and remains off, or a Laptop is disconnected from a power source.
Location The location of the battery
ManufactureDate The battery manufacture date.
Manufacturer The name of the company that manufactured the battery.
MaximumError The maximum error (as a percentage) in the Watt-hour data reported by the battery. The maximum error
indicates the upper bound on how much additional energy the battery may have above the energy it reports
having. When this value exceeds some value, for instance, 10%, some action must be taken (for instance, fully
discharge then fully charge the battery) within some specified time (for instance, within two recharge cycles of
the battery). If the action is not taken within the time frame, the error value will continue to rise. If this
property is not supported, value = -1
Name
Defines the label by which the object is known. When subclassed, the Name property can be overridden to be a
Key property.
Defines the label by which the object is known. When subclassed, the Name property can be overridden to be a
Key property.
RemainingCapacity The battery's remaining capacity in mWatt-hours. This value is used with Design Capacity or Full Charge
Capacity to calculate fuel gauge information.If this property is not supported, value = -1.
SerialNumber The serial number for this battery.
SmartBatteryVersion The Smart Battery Data Specification version number supported by this Battery. If the Battery does not support
this function, the value should be left blank.
Status This property indicates the current status of the logical device.
Possible values are:
OK
Error
Degraded
Unknown
Pred Fail
Starting
Stopping
Service
Stressed
NonRecover
No Contact
Lost Comm
Stopped
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
Dell_Chassis
AssetTag The Asset Tag of the system.
BootupState The current state of this system when it booted.
Possible values are:
1 - Other
2 - Unknown
3 - OK
4 - Warning
5 - Critical
6 - Non-Recoverable
BreachDescription
A free-form string providing more information if the SecurityBreach property indicates that a breach or some
other security-related event occurred.
Caption The caption of the device.
ChassisTypes An enumerated, integer-valued array indicating the type of Chassis.
Possible values are:
1 - Other
2 - Unknown
3 - Desktop
4 - Low Profile Desktop
5 - Pizza Box
6 - Mini Tower
7 - Tower
8 - Portable
9 - LapTop
10 - Notebook
11 - Hand Held
12 - Docking Station
13 - All in One
14 - Sub Notebook
15 - Space-Saving
16 - Lunch Box
17 - Main System Chassis
18 - Expansion Chassis
19 - SubChassis
20 - Bus Expansion Chassis
21 - Peripheral Chassis
22 - Storage Chassis
23 - Rack Mount Chassis
24 - Sealed-Case PC
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance. When used with the other
key properties of this class, this property allows all instances of this class and its subclasses to be uniquely
identified.
Description A short description of the chassis.
GlobalPlatformID
A string representing the unique platform identifier
LockPresent Boolean indicating whether the Frame is protected with a lock.