Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli80/EN/refgd/index.htm[10/19/2012 9:56:27 AM]
Associativity
An integer enumeration defining the system cache associativity. For example, 5 indicates a fully associative cache.
Possible values are:
0 - Unknown
1 - Other
2 - Direct Mapped
3 - 2-way Set-Associative
4 - 4-way Set-Associative
5 - Fully Associative
6 - 8-way Set-Associative
7 - 16-way Set-Associative
CacheType
Defines whether this is for instruction caching, data caching or both. Also, "Other" (1) and "Unknown" (0) can be defined.
Possible values are:
0 - Unknown
1 - Other
2 - Instruction
3 - Data
4 - Unified
Dependent The LogicalElement.
ReadPolicy
Policy that is employed by the Cache for handling read requests. For example, "Read", "Read-Ahead" or both can be specified using the values,
2, 3 or 4, respectively. If the read policy is determined individually (ie, for each request), then the value 5 ("Determination per I/O") should be
specified. "Other" (1) and "Unknown" (0) are also valid values.
Possible values are:
0 - Unknown
1 - Other
2 - Read
3 - Read-Ahead
4 - Read and Read-Ahead
5 - Determination Per I/O
WritePolicy
Defines whether this is write-back or write-through Cache, or whether this information "Varies with Address" (4) or is defined individually for
each I/O (5). Also, "Other" (1) and "Unknown" (0) can be specified.
Possible values are:
0 - Unknown
1 - Other
2 - Write Back
3 - Write Through
4 - Varies with Address
5 - Determination Per I/O
DCIM_AssociatedSensor
Antecedent The Sensor.
Dependent The ManagedSystemElement for which information is measured by the Sensor.
DCIM_RemoteAccessAvailableToElement
Antecedent The remote server or system.
Dependent The EnabledLogicalElement which has knowledge of the remote server or system.
IsDefault Indicates that this access information is defined as a default configuration for the system.
OrderOfAccess
When an element is accessing remote services and systems, it MAY be necessary to order those accesses. Defines that ordering - where lower
numbers indicate a higher priority for access. A value of 0 (default) indicates that ordering does not apply. If multiple RemoteAccessPoint
instances have the same value for OrderOfAccess, then these AccessPoints MAY be used in any sequence defined by the implementation.
DCIM_ServiceServiceDependency
Antecedent The required Service
Dependent The Service that is dependent on an underlying Service.
DCIM_DeviceConnection
Antecedent A LogicalDevice.
Dependent A second LogicalDevice that is connected to the Antecedent Device.
DCIM_ElementSoftwareIdentity
Antecedent A LogicalElement's Software Asset.
Dependent The ManagedElement that requires or uses the software.
DCIM_ElementCapabilities
Capabilities The Capabilities object associated with the element.
ManagedElement The managed element.
DCIM_ElementSettingData
An enumerated integer that indicates that the referenced SettingData represents the last requested values for attributes of the Managed Element
or that this information is unknown. Attributes of the SettingData itself indicate whether it represents the last configuration applied to the
ManagedElement or is a transient snapshot of the requested settings. Current operational characteristics of a ManagedElement should be
represented with properties of the ManagedElement. element or that this information is unknown. For a given ManagedElement and all instances