Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli80/EN/refgd/index.htm[10/19/2012 9:56:27 AM]
This property is set as the result of a method invocation (such as Start or StopService on CIM_Service), or can be overridden and defined as
WRITEable in a subclass. The method approach is considered superior to a WRITEable property, because it allows an explicit invocation of the
operation and the return of a result code.
If knowledge of the last RequestedState is not supported for the EnabledLogicalElement, the property is NULL or has the value 12 "Not
Applicable".
stemCreationClassName The CreationClassName of the scoping system.
SystemName The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
0 - Unknown
2 - Enabled
3 - Disabled
4 - Shut Down
5 - No Change - Indicates that no transition is in progress.
6 - Offline
7 - Test
8 - Defer
9 - Quiesce
10 - Reboot
11 - Reset
12 - Not Applicable - Indicates the implementation does not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process of transitioning.
DCIM_LCDPanel
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this
property allows all instances of this class and its subclasses to be uniquely identified.
DeviceID An address or other identifying information used to uniquely name the LogicalDevice.
DisplayDataCategory
Identifies the category of data to be displayed on the LCD Panel.
Possible values are:
2 - None
3 - User Specified
4 - Default
5 - IPv4 Address
6 - IDRAC MAC Address
7 - Service Tag
8 - System Name
9 - IPv6 Address
10 - Ambient
11 - System Power
DisplayModeUserString Contains a user configurable string to be displayed on the LCD panel if DisplayDataCategory has the value 3.
EnabledDefault
An enumerated value indicating an administrator's default or startup configuration for the Enabled State of an element.
Possible values are:
2 - Enabled
3 - Disabled
5 - Not Applicable
6 - Enabled but Offline
7 - No Default
9 - Quiesce
.. - DMTF Reserved
32768..65535 - Vendor Reserved
By default, the element is "Enabled" (value=2).
EnabledState
An integer enumeration that indicates the enabled and disabled states of an element. It can also indicate the transitions between these
requested states.
Possible values are:
0 - Unknown
1 - Other
2 - Enabled - Indicates that the element is or could be executing commands, will process any queued commands, and queues new requests.
3 - Disabled - Indicates that the element will not execute commands and will drop any new requests.
4 - Shutting Down - Indicates that the element is in the process of going to a Disabled state.
5 - Not Applicable - Indicates the element does not support being enabled or disabled.
6 - Enabled but Offline - Indicates that the element may be completing commands, and will drop any new requests.
7 - In Test -Indicates that the element is in a test state.
8 - Deferred - Indicates that the element may be completing commands, but will queue any new requests.
9 - Quiesce - Indicates that the element is enabled but in a restricted mode.
10 - Starting - Indicates that the element is in the process of going to an Enabled state. New requests are queued.
11..32767 - DMTF Reserved
32768..65535 - Vendor Reserved
For example, shutting down (value=4) and starting (value=10) are transient states between enabled and disabled.
LocalConfigurationEnabled
Indicates if the LCD panel may be used to modify the system configuration.
A value of "true" indicates system configuration via the LCD panel is enabled.
A value of "false" indicates system configuration via the LCD panel is disabled.
SystemCreationClassName The CreationClassName of the scoping system.
SystemName The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
0 - Unknown
2 - Enabled
3 - Disabled
4 - Shut Down
5 - No Change - Indicates that no transition is in progress.
6 - Offline
7 - Test
8 - Defer
9 - Quiesce
10 - Reboot
11 - Reset
12 - Not Applicable - Indicates the implementation does not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process of transitioning.