Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli80/EN/refgd/index.htm[10/19/2012 9:56:27 AM]
TransitioningToState
5 - No Change - Indicates that no transition is in progress.
6 - Offline
7 - Test
8 - Defer
9 - Quiesce
10 - Reboot
11 - Reset
12 - Not Applicable - Indicates the implementation does not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process of transitioning.
DCIM_Processor
Caption The Caption property is a short textual description (one- line string) of the object.
CPUStatus
The CPUStatus property that indicates the current status of the Processor.
Possible values are:
0 - Unknown
1 - CPU Enabled
2 - CPU Disabled by User
3 - CPU Disabled By BIOS (POST Error)
4 - CPU Is Idle
7 - Other
For example, the Processor may be disabled by the user (value=2), or disabled due to a POST error (value=3). Information in this property can
be obtained from SMBIOS, the Type 4 structure, and the Status attribute.
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this
property allows all instances of this class and its subclasses to be uniquely identified.
CurrentClockSpeed The current speed (in MHz) of this Processor.
Description Provides a textual description of the object.
DeviceID An address or other identifying information used to uniquely name the LogicalDevice.
ElementName
A user-friendly name for the object. This property allows each instance to define a user-friendly name in addition to its key properties, identity
data, and description information.
Note: The Name property of ManagedSystemElement is also defined as a user-friendly name. But, it is often subclassed to be a Key. It is not
reasonable that the same property can convey both identity and a user-friendly name, without inconsistencies. Where Name exists and is not a
Key (such as for instances of LogicalDevice), the same information can be present in both the Name and ElementName properties.
EnabledDefault
An enumerated value indicating an administrator's default or startup configuration for the Enabled State of an element.
Possible values are:
2 - Enabled
3 - Disabled
5 - Not Applicable
6 - Enabled but Offline
7 - No Default
9 - Quiesce
.. - DMTF Reserved
32768..65535 - Vendor Reserved
By default, the element is "Enabled" (value=2).
EnabledState
An integer enumeration that indicates the enabled and disabled states of an element. It can also indicate the transitions between these
requested states.
Possible values are:
0 - Unknown
1 - Other
2 - Enabled - Indicates that the element is or could be executing commands, will process any queued commands, and queues new requests.
3 - Disabled - Indicates that the element will not execute commands and will drop any new requests.
4 - Shutting Down - Indicates that the element is in the process of going to a Disabled state.
5 - Not Applicable - Indicates the element does not support being enabled or disabled.
6 - Enabled but Offline - Indicates that the element may be completing commands, and will drop any new requests.
7 - In Test - Indicates that the element is in a test state.
8 - Deferred - Indicates that the element may be completing commands, but will queue any new requests.
9 - Quiesce - Indicates that the element is enabled but in a restricted mode.
10 - Starting - Indicates that the element is in the process of going to an Enabled state. New requests are queued.
11..32767 - DMTF Reserved
32768..65535 - Vendor Reserved
For example, shutting down (value=4) and starting (value=10) are transient states between enabled and disabled.
ExternalBusClockSpeed The speed (in MHz) of the external bus interface (also known as the front side bus).
The Processor family type.
Possible values are:
1 - Other
2 - Unknown
3 - 8086
4 - 80286
5 - 80386
6 - 80486
7 - 8087
8 - 80287
9 - 80387
10 - 80487
11 - Pentium(R) brand
12 - Pentium(R) Pro
13 - Pentium(R) II
14 - Pentium(R) processor with MMX(TM) technology
15 - Celeron(TM)
16 - Pentium(R) II Xeon(TM)
17 - Pentium(R) III
18 - M1 Family
19 - M2 Family
20 - Intel(R) Celeron(R) M processor
21 - Intel(R) Pentium(R) 4 HT processor
24 - K5 Family
25 - K6 Family
26 - K6-2
27 - K6-3
28 - AMD Athlon(TM) Processor Family
29 - AMD(R) Duron(TM) Processor
30 - AMD29000 Family
31 - K6-2+
32 - Power PC Family
33 - Power PC 601