Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli80/EN/refgd/index.htm[10/19/2012 9:56:27 AM]
EnabledState
0 - Unknown
1 - Other
2 - Enabled - Indicates that the element is or could be executing commands, will process any queued commands, and queues new requests.
3 - Disabled - Indicates that the element will not execute commands and will drop any new requests.
4 - Shutting Down - Indicates that the element is in the process of going to a Disabled state.
5 - Not Applicable - Indicates the element does not support being enabled or disabled.
6 - Enabled but Offline - Indicates that the element may be completing commands, and will drop any new requests.
7 - In Test - Indicates that the element is in a test state.
8 - Deferred - Indicates that the element may be completing commands, but will queue any new requests.
9 - Quiesce - Indicates that the element is enabled but in a restricted mode.
10 - Starting - Indicates that the element is in the process of going to an Enabled state. New requests are queued.
11..32767 - DMTF Reserved
32768..65535 - Vendor Reserved
For example, shutting down (value=4) and starting (value=10) are transient states between enabled and disabled.
InfoFormat
An enumerated integer that describes the format and interpretation of the AccessInfo property.
Possible values are:
1 - Other
2 - Host Name
3 - IPv4 Address
4 - IPv6 Address
5 - IPX Address
6 - DECnet Address
7 - SNA Address
8 - Autonomous System Number
9 - MPLS Label
10 - IPv4 Subnet Address
11 - IPv6 Subnet Address
12 - IPv4 Address Range
13 - IPv6 Address Range
100 - Dial String
101 - Ethernet Address
102 - Token Ring Address
103 - ATM Address
104 - Frame Relay Address
200 - URL
201 - FQDN
202 - User FQDN
203 - DER ASN1 DN
204 - DER ASN1 GN
205 - Key ID
.. - DMTF Reserved
32768..65535 - Vendor Reserved
Name
The Name property uniquely identifies the ServiceAccessPoint and provides an indication of the functionality that is managed. This functionality is
described in more detail in the Description property of the object.
RequestedState
An integer enumeration that indicates the last requested or desired state for the element, irrespective of the mechanism through which it was
requested. The actual state of the element is represented by EnabledState. This property is provided to compare the last requested and current
enabled or disabled states.
Note: When EnabledState is set to 5 ("Not Applicable"), then this property has no meaning. See the EnabledState property description for
explanations of the values in the RequestedState enumeration.
Note: The value "No Change" (5) has been deprecated instead of indicating the last requested state is "Unknown" (0). If the last requested or
desired state is unknown, RequestedState should have the value "Unknown" (0), but may have the value "No Change" (5).
There are two new values in RequestedState that build on the statuses of EnabledState. These are "Reboot" (10) and "Reset" (11).
Shut Down requests an orderly transition to the Disabled state, and may involve removing power, to completely erase any existing state. The
Disabled state requests an immediate disabling of the element, such that it will not execute or accept any commands or processing requests.
This property is set as the result of a method invocation (such as Start or StopService on CIM_Service), or can be overridden and defined as
WRITEable in a subclass. The method approach is considered superior to a WRITEable property, because it allows an explicit invocation of the
operation and the return of a result code. If knowledge of the last RequestedState is not supported for the EnabledLogicalElement, the property
is NULL or has the value 12 "Not Applicable".
Possible values are:
0 - Unknown - Indicates the last requested state for the element is unknown.
2 - Enabled
3 - Disabled
4 - Shut Down
5 - No Change
6 - Offline - Indicates that the element has been requested to transition to the Enabled but Offline EnabledState.
7 - Test
8 - Deferred
9 - Quiesce
10 - Reboot - Indicates a "Shut Down" and then moving to an "Enabled" state.
11 - Reset - Indicates that the element is first "Disabled" and then "Enabled".
12 - Not Applicable
.. - DMTF Reserved
32768..65535 - Vendor Reserved
SystemCreationClassName The CreationClassName of the scoping System.
SystemName The Name of the scoping System.
TransitioningToState
Indicates the target state to which the instance is transitioning. A value other than 5 or 12 identifies the state to which the element is in the
process of transitioning.
Possible values are:
0 - Unknown
2 - Enabled
3 - Disabled
4 - Shut Down
5 - No Change - Indicates that no transition is in-progress.
6 - Offline
7 - Test
8 - Defer
9 - Quiesce
10 - Reboot
11 - Reset
12 - Not Applicable - Indicates the implementation does not support representing ongoing transitions
DCIM_Slot
Describes the type of packaging normally associated with this type of connector.