Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli80/EN/refgd/index.htm[10/19/2012 9:56:27 AM]
Standby State
Selects the power management suspend mode. (SuspendMode property in OMCI 7.x)
Possible values are:
1 Standby S1
2 Standby S3
Strong Password
Enables or disables Strong Password.
Possible values are:
1 - Disable
2 - Enable
Surround View
This feature will allow user to enable SurroundView that allow user to use an additional AMD PCIE video card
in conjunction with the onboard graphics card which would give you ability to use multiple monitors at once.
Notes: it's only for AMD platform/ disable SurroundView thatdisable multiple monitor support with additional
AMD PCIE video card. Notes: it's only for AMD platform.
Possible values are:
1 - Disable
2 - Enable
Tablet Buttons
Enables or disables Tablet Buttons.
Possible values are:
1 - Disable
2 - Enable
Tertiary IDE Channel, Master Device
Enables or disables tertiary Parallel ATA master channel.
Possible values are:
1 - Off
2 - Auto
Tertiary IDE Channel, Slave Device
Enables or disables tertiary Parallel ATA master channel.
Possible values are:
1 - Off
2 - Auto
Trusted Platform Module
Enables or disables the Trusted Platform Module (TPM).
Possible values are:
1 - Enable
2 - Disable
Trusted Platform Module Activation
This property is used to activate the TPM if it is deactivated, un-owned and a BIOS Admin password is set
and has been verified; otherwise this property reports the
status of the TPM Activation BIOS option.
Possible values are:
1 - Deactivate
2 - Activate
UART Power Down
Allow OS to power down or Prohibit OS from powering down UART.
Possible values are:
1 - Disable
2 - Enable
USB
Enables, Disables, or sets the system's USB port to No Boot (if supported). (USB Ports property in OMCI 7.X)
Possible values are:
1 - Disable
2 - Enable
3 - No boot
USB Emulation
Enables or disables USB keyboard and mouse support for Operating systems that do not natively support USB
keyboards and mice.
Possible values are:
1 - Enable
2 - Disable
USB Flash Drive Emulation
Sets the USB Flash Drive Emulation to Auto, Floppy, or Hard Disk.
Possible values are:
1 - Auto
2 - Floppy
3 - HD only
USB Port 0
Enables or disables USB Port 00.
Possible values are:
1 - Disable
2 - Enable
USB Port 1
Enables or disables USB Port 01.
Possible values are:
1 - Disable
2 - Enable
USB Port 2
Enables or disables USB Port 02.
Possible values are:
1 - Disable
2 - Enable
USB Port 3
Enables or disables USB Port 03.
Possible values are:
1 - Disable
2 - Enable
USB Port 4
Enables or disables USB Port 04.
Possible values are:
1 - Disable
2 - Enable
USB Port 5
Enables or disables USB Port 05.
Possible values are:
1 - Disable
2 - Enable
USB Port 6
Enables or disables USB Port 06.
Possible values are: