Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli80/EN/refgd/index.htm[10/19/2012 9:56:27 AM]
Parallel Mode 2 - PS2
3 - ECP
4 - EPP
5 - ECP DMA1
6 - ECP DMA3
Parallel Port
Defines the parallel port configuration.
Possible values are:
1 - Disable
2 - LPT1
3 - LPT2
4 - LPT3
Password Bypass
Sets the Password Bypass feature to one of the supported settings.
Possible values are:
1 - Off
2 - Reboot
3 - Resume
4 - Reboot and resume
Password Status Lock
Password Status lock/unlock.
Possible values are:
1 - Locked
2 - Unlocked
PC Card
Enables or disables the PC Card.
Possible values are:
1 - Disable
2 - Enable
PC Card and 1394
Enables or disables the PC Card and 1394 devices.
Possible values are:
1 - Disable
2 - Enable
PCI Slots
Enables or disables the PC Card.
Possible values are:
1 - Disable
2 - Enable
Pen Missing Indication
Enables or disables the Missing Pen Indication.
Possible values are:
1 - Disable
2 - Enable
Pen Resume On
Enables or disables the Resume On Pen setting.
Possible values are:
1 - Disable
2 - Enable
Pointing Device
Defines whether the built-in pointing device port is enabled or disabled. ( BuiltinPointingDevice property in
OMCI 7.X)
Possible values are:
1 - External serial
2 - External PS2
3 - SW TPAD
POST Help Desk Key
Enables or disables POST Help Desk Key.
Possible values are:
1 - Disable
2 - Enable
POST MEBx Key Setting
Enables or disables POST MEBx Key.
Possible values are:
1 - On
2 - Off
POST Testing
Enables or disables fast booting. (FastBoot property in OMCI7.X)
Possible values are:
1 - Min
2 - Max
3 - Auto
Power Management
Defines the power management settings.
Possible values are:
1 - Disable
2 - Min
3 - Regular
4 - Max
Processor CMP
Rolls the number of enabled cores in each processor. By default, the maximum number of cores per processor
will be enabled.(NumberOfCoresPerProcessor property in OMCI7.x)
Possible values are:
1 - All
2 - 1
3 - 2
4 - 4
5 - 6
6 - 8
7 - 10
8 - 12
Processor Execute Disable
Enables or disables the No Execute (NX) flag. (NoExecute property in OMCI7.x)
Possible values are:
1 - Disable
2 - Enable
Processor HT Assist
Allow user the ability to disable the Probe Filter chipset option from BIOS setup. There are some applications
that may have lower performance with the chipset feature enabled.
Possible values are:
1 - Disable
2 - Enable