Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli80/EN/refgd/index.htm[10/19/2012 9:56:27 AM]
2 - Enable
Microphone
Enables or disables Dell notebook internal/external microphone.
Possible values are:
1 - Disable
2 - Enable
MiniPCI Device
Enables or disables the internal PCI device.
Possible values are:
1 - Disable
2 - Enable
Multiple CPU Cores
Enables or disables Multiple CPU Core support on next boot. The Disabled state prevents the OS from seeing
additional cores present on a single CPU package.
Possible values are:
1 Disable
2 Enable
Module Bay Device
Enables or disables the Module Bay Device.
Possible values are:
1 - Disable
2 - Enable
Mouse
Sets the Pointing Device.
Possible values are:
1 - Disable
2 - Enable
Monitor Toggling
Enables or disables Monitor Toggling
Possible values are:
1 - Disable
2 - Enable
NIC
Defines whether the built-in NIC is enabled or disabled. (BuiltinNIC property in OMCI7.X)
Possible values are:
1 - Disable
2 - Enable
3 - Enable non PXE
4 - Enable iSCSI
5 - Enable RPL
6 - Enable image server
NIC 2
Defines whether the built-in NIC2 is enabled or disabled. (BuiltinNIC2 property in OMCI7.X)
Possible values are:
1 Disable
2 Enable
3 Enable non PXE
4 Enable iSCSI
5 Enable RPL
6 Enable image server
Network Activity LED
This selection will allow the Activity LED to be controlled by an ACPI OS and driver/ set Activity LED as a
wireless LAN radio on/off indicator/ force the Activity LED to be always OFF.
Possible values are:
1 Disable
2 Enable ACPI OS control
3 Wireless LAN Indicator
Node Interleaving
Enables or disables Node Interleave.
Possible values are:
1 - Disable
2 - Enable
NMI Button
Enables or disables the NMI Button.
Possible values are:
1 - Enable
2 - Disable
Num Lock
Enables or disables Num Lock.
Possible values are:
1 Disable
2 Enable
On Reader
Enables or disables Latitude/Precision/Optiplex On Reader feature.
Possible values are:
1 - Disable
2 - Enable
Onboard Modem
Enables or disables the Onboard Modem.
Possible values are:
1 - Disable
2 - Enable
Onboard 1394
Enables or disables on-board 1394 controller on next boot.
Possible values are:
1 - Disable
2 - Enable
Optical Drive Controller
Enables or disables the Optical Drive Controller.
Possible values are:
1 - Enable
2 - Disable
OS Install Mode
Enables or disables OS Install Mode (Limit System Memory feature).
Possible values are:
1 - Disable
2 - Enable
Defines the parallel port mode.
Possible values are:
1 - AT