Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli80/EN/refgd/index.htm[10/19/2012 9:56:27 AM]
Hot Undocking Possible values are:
1 - Disable
2 - Enable
Hotkey to toggle WxAN Radio
Enables or disables hotkey to toggle WxAN radio.
Possible values are:
1 - Disable
2 - Enable
Integrated RAID
Enables or disables the Integrated RAID Controller.
Possible values are:
1 - Disable
2 - Enable
Integrated SAS
Enables or disables the Integrated SAS Controller.
Possible values are:
1 - Disable
2 - Enable
Integrated USB Hub
Sets the Integrated USB Hub to Compatible or High Speed.
Possible values are:
1 - Disable
2 - Enable
Internal USB Port
Enables or disables the Internal USB.
Possible values are:
1 - Disable
2 - Enable
IDE
Defines whether the IDE controller is enabled or disabled.
Possible values are:
1 - Disable
2 - Auto
Instant ON
Enables or disables the Latitude on Instant ON feature.
Possible values are:
1 - Disable
2 - Enable
Keyboard Error Reporting
Enables or disables reporting of Keyboard errors by POST.
Possible values are:
1 Disable
2 Enable
Keyboard Click
Enables or disables the keyboard to ‘click’ each time a key is pressed.
Possible values are:
1 - Disable
2 - Enable
Keyboard Illumination
Sets the Keyboard Illumination to Enable, Disable, or Auto.
Possible values are:
1 - Disable
2 - Enable
3 - Auto
Keypad
Changes the means of enabling the keypad.
Possible values are:
1 - By numlock
2 - BY FN key
Latitude ON
Enables or disables Latitude On.
Possible values are:
1 - Disable
2 - Enable
Latitude ON Flash
Enables or disables Latitude On Flash.
Possible values are:
1 - Disable
2 - Enable
Limit CPUID Value
Enables or disables the Limit CPUID Value feature.
Possible values are:
1 - Disable
2 - Enable
Low Power Mode
Enables or disables the low power (S5) state.
Possible values are:
1 - Enable
2 - Disable
Management Driver
Sets to Present: the system-management instrumentation sets this attribute when it loads to instruct that
BIOS that operating-system level software is handling any out-of-range management condition — if a critical
threshold is passed, the driver takes responsibility for shutting down the operating system and powering-off
the system. The instrumentation is responsible for de-registering itself via the Absent attribute when it
unloads. Implementation Note: To maintain compatibility with Dell OpenManage Client, a BIOS that
implements of this token via an Indexed I/O access method must ensure that an AND-mask of 0xFB and an
OR-value of 0x04 maintains the “present” status— i.e. the status is in bit 2 of the indexed I/O location.
Sets to Absent: this attribute indicates to the system BIOS that any system-management monitoring is its
responsibility. If an out-of-range management condition occurs in the system, the BIOS powers off the
system to prevent hardware damage. Implementation Note: To maintain compatibility with Dell OpenManage
Client, a BIOS that implements of this token via an Indexed I/O access method must ensure that an AND-
mask of 0xFB and an OR-value of 0x00 maintains the “absent” status — i.e. the status is in bit 2 of the
indexed I/O location.
Possible values are:
1 - Present
2 - Absent
Media Card and 1394
Enables or disables the Media Card and 1394 devices.
Possible values:
1 - Disable