Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli80/EN/refgd/index.htm[10/19/2012 9:56:27 AM]
5 - RAID
6 - QDMA
Embedded Hypervisor
Enables/disables the embedded SD Card port. (SD Card property in OMCI7.x)
Possible values are:
1 - Disable
2 - Enable
e-SATA Ports
Enable/disable e-SATA Ports
Possible values are:
1 - Disable
2 - Enable
Express Card
This setting will enable the express card port, which allows the user to insert an express card into the slot and
it will be configured.
Possible values are:
1 - Disable
2 - Enable
Express Charge
This property define the express charging.
Possible values are:
1 - Disable
2 - Enable
3 - Enable once
External Hotkey
Sets the External Hotkey to Scroll Lock or Disabled.
Possible values are:
1 - Disable
2 - Scroll lock
External USB Ports
Enable/disable external USB ports (USBPortsExternal property in OMCI 7.X)
Possible values are:
1 Disable
2 Enable
F12 POST Display
Enables or disables the F12 key at POST.
Possible values are:
1 Disable
2 Enable
F2 POST Display
Enables or disables the F2 key at POST.
Possible values are:
1 - Disable
2 - Enable
Force PXE on Next Boot
The next time the BIOS boots the system, the first PXE-capable device is inserted as the first device in the
boot sequence. Enabling this value causes this operation on the next boot only, and does not cause a change
in the system's defined boot sequence. The BIOS chooses the first PXE-capable device as the system's
onboard network controller, if present and enabled, or the first bootable network device found in the system's
standard PCI search order whichever comes first. Disabling this value the boot override feature is disabled
and the system boot sequence is in effect.
Possible values are:
1 - Disable
2 - Enable
Front Panel USB Ports
Enables or disables the USB ports on the front of the chassis. (USBFrontPanelPorts property in OMCI 7.X)
Possible values are:
1 - Disable
2 - Enable
Hard Drive Free Fall Protection
Enables or disables hard drive free fall protection.
Possible values are:
1 - Disable
2 - Enable
Hard-Disk Failover
Specifies which devices in the Hard-Disk Drive Sequence menu are attempted in the boot sequence. When set
to OFF, only the first device in the list is attempted. When set to ON, all devices are attempted in order, as
listed in the Hard-Disk Drive Sequence.
Possible values are:
1 - Disable
2 - Enable
Hard Disk Acoustic Mode
Sets the Hard Disk Acoustic Mode.
Possible values are:
1 - Bypass
2 - Quiet
3 - Suggested
4 - Performance
Hardware Prefetcher
Enables or disables the CPU’s HW prefetcher.
Possible values are:
1 - Disable
2 - Enable
Hard Drive Free Fall Protection
Enables or disables hard drive free fall protection.
Possible values are:
1 - Disable
2 - Enable
Hardware Prefetch Training on Software
Prefetch
Prevents hardware prefetcher from considering software prefetches when detecting strides for prefetch
requests./Hardware prefetcher considers software prefetches when detecting strides for prefetch requests.
Possible values are:
1 - Disable
2 - Enable
HDD Protection
If setting "On", the HDD Protection OPROM will be loaded. If setting "Off", the HDD Protection OPROM will be
not loaded.
Possible values are:
1 - Off
2 - On
Enables or disables warm and hot docking/undocking.