Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli80/EN/refgd/index.htm[10/19/2012 9:56:27 AM]
Boot Mode
Possible values are:
1 Bios
2 UEFI
Boot Sequence
This defines the boot sequence for the next system boot. Boot Sequence information can be found under the
class Dell_BootDeviceSequence with OMCI 6.1.
Possible values are:
1 - Diskette first
2 - HD only
3 - Device list
4 - CDROM first
Boot-time Video
Sets the Primary Video source. (PrimaryVideo property in OMCI7.x)
Possible values are:
1 - On board
2 - Add-in
Broadcom ASF
Sets the Alert Standard Format (ASF) mode.
Possible values are:
1 - Disable
2 - Enable
3 - Alert only
4 - Dash and ASF
Bus Ratio
Sets Bus Ratio.
Possible values are:
1 - Max
2 - 6.0
3 - 7.0
4 - 7.5
5 - 8.0
6 - 8.5
7 - 9.0
8 - 9.5
Camera
Enables or disables Camera.
Possible values are:
1 - Disable
2 - Enable
Cellular Radio
Enables or disables the cellular radio, that is, the WWAN module.
Possible values are:
1 - Disable
2 - Enable
Charger
This property define the charger details.
Possible values are:
1 - Disable
2 - Enable
Chassis Intrusion
Enables the system to detect and report Chassis Intrusion events to the system display on boot-up.
Possible values are:
1 - Disable
2 - Enable
3 - Silent
Chassis Intrusion Status
This property shows the status of the system with regards to Chassis Intrusion (Detected or Not Detected). A
value of Unknown indicates one of two things: either Chassis Intrusion is not supported by this system, or
Chassis Intrusion event reporting has been disabled by the user. If the value is Detected, the user may set it
to Not Detected to enable the system to receive the next event and to stop generating events for now.
Possible values are:
1 - Tripped
2 - Door open
3 - Door closed
4 - Trip reset
Clear System Event Log
Prevents or causes the system event log to be cleared in the next boot.
Possible values are:
1 - Disable
2 - Enable
Cool and Quiet
Enables or disables AMD Cool and Quiet processor feature.
Possible values are:
1 - Disable
2 - Enable
CPU Virtualization Technology
Enables or disables CPU Virtualization.
Possible values are:
1 Disable
2 Enable
Diskette
Defines whether the built-in Floppy controller is enabled, auto or read-only. (BuiltInFloppy property in
OMCI7.X)
Possible values are:
1 - Disable
2 - Auto
3 - Read Only
4 - USB
5 - Internal
DRAM Prefetcher
Prevents DRAM references from triggering DRAM prefetch requests./Turns on the DRAM prefetch unit in the
Northbridge.
Possible values are:
1 - Disable
2 - Enable
Embedded SATA Controller
Sets the Integrated SATA Controller.
Possible values are:
1 - Off
2 - Combined
3 - ATA
4 - AHCI