Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli80/EN/refgd/index.htm[10/19/2012 9:56:27 AM]
Dell_RemoteFlashBIOSSettings
Caption The caption of the device.
CompletionCode
Defines the completion code of the last BIOS update.
Possible values are:
1 - Other
2 - Unknown
3 - Completed successfully
4 - Bad Image
5 - Could not access flash
6 - Flash memory not ready
7 - Currently disabled
8 - Battery must be installed
9 - Fully charged battery must be installed
10 - External power adapter must be connected
11 - 12 Volts could not be set
12 - 12 Volts could not be removed
13 - A flash memory failure occurred
14 - A general failure occurred
15 - A data miscompare error occurred
16 - The image could not be found in memory
17 - No update operation has been performed
DellInstanceID Defines the instance ID of this class.
Description A short description of the device.
EnableUpdate This property is used by Dell OpenManage to enable a Remote Flash BIOS update on the next boot. Dell
OpenManage Client Administrator (OMCA) automatically sets this property to Enabled during remote flash
BIOS operations.
Possible values are:
1 - Other
2 - Unknown
3 - Enable
4 - Disable
LastBIOSUpdate
Defines the date of last BIOS update.
MinimumSizeofContiguousMemory
Defines the minimum size of contiguous memory required for remote BIOS update.
SettingID The identifier by which the Setting object is known.
Support
Defines whether remote flash BIOS updates are supported by this system.
Possible values are:
1 - This system supports remote flash BIOS update
2 - This system does not support remote flash BIOS update
Dell_SMBIOSSettings
AGPSlot Enables or disables the on-board AGP slot.
Possible values are:
1 - Other
2 - Unsupported
3 - Enabled
4 - Disabled
AmbientLightSensor Enables or disables the Ambient Light Sensor.
Possible values are:
1 - Other
2 - Unsupported
3 - Enabled
4 - Disabled
ASFMode Sets the ASF (Alert Standard Format) mode.
Possible values are:
1 - Other
2 - Unsupported
3 - Disabled
4 - Enabled
5 - AlertingOnly
6 - DASH and ASF2.0
AudioMode Onboard audio mode. Disabled mode completely un-assigns the onboard hardware resources. Half duplex
mode allows only record or playback. Full duplex mode can record and playback sounds simultaneously.
Possible values are:
1 - Other
2 - Unsupported
3 - Disabled
4 - Half Duplex
5 - Full Duplex
AutoOn
Defines the auto-on configuration: disabled, everyday or weekdays (Monday-Friday).
Possible values are:
1 - Other
2 - Unsupported
3 - Disabled
4 - Every day
5 - Weekdays
AutoOnHour
Defines the hour when to turn on the system (0-23).
Possible values are:
1 - Other
2 - Unsupported
AutoOnMinute
Defines the minutes when to turn on the system (0-59).
Possible values are:
1 - Other
2 - Unsupported