Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli80/EN/refgd/index.htm[10/19/2012 9:56:27 AM]
PhysicalSizeH Horizontal screen size in cm.
PhysicalSizeV Vertical screen size in cm.
Product Product name for this monitor.
ProductCode Product code of this monitor.
SeperateSyncHVSupported Separate Sync H and V Signals are supported.
sRGBStandardDefaultColorSpace If the bit is set to 1, the display uses the sRGB standard default color space as its primary color space.
StandbyModeSupported Standby mode support for this monitor
SuspendModeSupported Suspend mode support for this monitor
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
VeryLowPowerSupported Very low power mode support for this monitor
Dell_NetworkAdapter
Note: The Network Adapter class displays the virtual software adapters provided by the operating system. Those properties are not displayed in the Device
Manager.
Note: OMCI may populate empty or error values of some properties for Bluetooth devices.
Caption The caption of the device.
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance. When used with the other
key properties of this class, this property allows all instances of this class and its subclasses to be uniquely
identified.
CurrentNetworkAddress This is the node address that can be modified by software, sometimes referred to as the Locally Administered
Address (LAA).
Description A short description of the device.
DeviceID An address or other identifying information to uniquely name the logical device.
Link Technology Defines the topology of the network. Ethernet, Token Ring etc.
Possible values are:
1 - Unknown
2 - Other
3 - Ethernet
4 - IB
5 - FC
6 - FDDI
7 - ATM
8 - Token Ring
9 - Frame Relay
10 - Infra Red
11 - Blue Tooth
12 - Wireless
MajorVersion
Indicates the major version of the driver.
MinorVersion
Indicates the minor version of the driver.
Manufacturer Manufacturer of this network adapter.
Note: This property displays the JEDEC ID code for the manufacturer of the memory. For information on JEDEC
ID codes, see www.jedec.org.
MaxSpeed The maximum speed, in Bits per Second, for the network adapter.
Name
Defines the label by which the object is known. When subclassed, the Name property can be overridden to be a
Key property.
NetConnectionID
Indicates the name of the network adapter interface in windows.
Product Product name for this network adapter.
ServiceName
Indicates the service name of the network adapter. This name is usually shorter that the full product name.
Speed An estimate of the current bandwidth in Bits per Second. For Adapters which vary in bandwidth or for those
where no accurate estimation can be made, this property should contain the nominal bandwidth.
Status
A string indicating the current status of the object. Various operational and non-operational statuses are
defined.
Operational statuses are:
OK
Degraded
Stressed
Pred Fail
Stressed - Indicates that the Element is functioning, but needs attention.
Non-operational statuses can also be specified. These are:
Error
NonRecover - Indicates that a non-recoverable error has occurred
Starting
Stopping
Stopped
Service
No Contact
Lost Comm
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
TimeOfLastReset
Indicates when the network adapter was last reset.
Note: This property will not be available in this release. Obtain the value from cimv2 namespace.
Dell_PCCard
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance. When used with the other
key properties of this class, this property allows all instances of this class and its subclasses to be uniquely
identified.
Description A short description of the PC card.